On some boards there is a gpio to reset the LCD panel, add support for this.

Signed-off-by: Hans de Goede <hdego...@redhat.com>
---
 board/sunxi/Kconfig           |  8 ++++++++
 drivers/video/sunxi_display.c | 11 ++++++++++-
 2 files changed, 18 insertions(+), 1 deletion(-)

diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index 0226d28..70e6f4d 100644
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -317,6 +317,14 @@ config VIDEO_LCD_POWER
        Set the power enable pin for the LCD panel. This takes a string in the
        format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
 
+config VIDEO_LCD_RESET
+       string "LCD panel reset pin"
+       depends on VIDEO
+       default ""
+       ---help---
+       Set the reset pin for the LCD panel. This takes a string in the format
+       understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
+
 config VIDEO_LCD_BL_EN
        string "LCD panel backlight enable pin"
        depends on VIDEO
diff --git a/drivers/video/sunxi_display.c b/drivers/video/sunxi_display.c
index dbda97e..7f01401 100644
--- a/drivers/video/sunxi_display.c
+++ b/drivers/video/sunxi_display.c
@@ -592,7 +592,7 @@ static void sunxi_lcdc_enable(void)
 
 static void sunxi_lcdc_panel_enable(void)
 {
-       int pin;
+       int pin, reset_pin;
 
        /*
         * Start with backlight disabled to avoid the screen flashing to
@@ -610,6 +610,12 @@ static void sunxi_lcdc_panel_enable(void)
                gpio_direction_output(pin, PWM_OFF);
        }
 
+       reset_pin = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_RESET);
+       if (reset_pin != -1) {
+               gpio_request(reset_pin, "lcd_reset");
+               gpio_direction_output(reset_pin, 0); /* Assert reset */
+       }
+
        /* Give the backlight some time to turn off and power up the panel. */
        mdelay(40);
        pin = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_POWER);
@@ -617,6 +623,9 @@ static void sunxi_lcdc_panel_enable(void)
                gpio_request(pin, "lcd_power");
                gpio_direction_output(pin, 1);
        }
+
+       if (reset_pin != -1)
+               gpio_direction_output(reset_pin, 1); /* De-assert reset */
 }
 
 static void sunxi_lcdc_backlight_enable(void)
-- 
2.1.0

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to