On 15-02-12 12:29 AM, Dileep Katta wrote:
Hi Steve,

On 11 February 2015 at 05:25, Steve Rae <s...@broadcom.com> wrote:

Hi, Dileep


On 15-02-10 12:49 AM, Dileep Katta wrote:

Adds the fastboot erase functionality, to erase a partition
specified by name. The erase is performed based on erase group size,
to avoid erasing other partitions. The start address and the size
is aligned to the erase group size for this.

Currently only supports erasing from eMMC.

Signed-off-by: Dileep Katta <dileep.ka...@linaro.org>
---
Note: The changes are on top of oem command support added by r...@kernel.org

   common/fb_mmc.c                 | 58 
+++++++++++++++++++++++++++++++++++++++++
   drivers/usb/gadget/f_fastboot.c | 23 ++++++++++++++++
   include/fb_mmc.h                |  1 +
   3 files changed, 82 insertions(+)

diff --git a/common/fb_mmc.c b/common/fb_mmc.c
index 6ea3938..3911989 100644
--- a/common/fb_mmc.c
+++ b/common/fb_mmc.c
@@ -10,6 +10,7 @@
   #include <part.h>
   #include <aboot.h>
   #include <sparse_format.h>
+#include <mmc.h>

   #ifndef CONFIG_FASTBOOT_GPT_NAME
   #define CONFIG_FASTBOOT_GPT_NAME GPT_ENTRY_NAME
@@ -110,3 +111,60 @@ void fb_mmc_flash_write(const char *cmd, void 
*download_buffer,
                 write_raw_image(dev_desc, &info, cmd, download_buffer,
                                 download_bytes);
   }
+
+void fb_mmc_erase(const char *cmd, char *response)
+{
+       int ret;
+       block_dev_desc_t *dev_desc;
+       disk_partition_t info;
+       lbaint_t blks, blks_start, blks_size, grp_size;
+       struct mmc *mmc = find_mmc_device(CONFIG_FASTBOOT_FLASH_MMC_DEV);
+
+       if (mmc == NULL) {
+               error("invalid mmc device\n");

no newline with error()
Will remove

+               fastboot_fail("invalid mmc device");
+               return;
+       }
+
+       /* initialize the response buffer */
+       response_str = response;
+
+       dev_desc = get_dev("mmc", CONFIG_FASTBOOT_FLASH_MMC_DEV);
+       if (!dev_desc || dev_desc->type == DEV_TYPE_UNKNOWN) {
+               error("invalid mmc device\n");

no newline with error()
Will remove


+               fastboot_fail("invalid mmc device");
+               return;
+       }
+
+       ret = get_partition_info_efi_by_name(dev_desc, cmd, &info);
+       if (ret) {
+               error("cannot find partition: '%s'\n", cmd);

no newline with error()
Will remove

+               fastboot_fail("cannot find partition");
+               return;
+       }
+
+       puts("Erasing partition\n");
+
+       /* Align blocks to erase group size to avoid erasing other partitions */
+       grp_size = mmc->erase_grp_size;
+       blks_start = (info.start + grp_size - 1) & ~(grp_size - 1);
+       if (info.size >= grp_size)
+               blks_size = (info.size - (blks_start - info.start)) &
+                               (~(grp_size - 1));
+       else
+               blks_size = 0;


Is this logic correct??? Isn't the "erase_grp_size" in bytes? and the info.start 
& info.size in LBA's?
Yes, the math will take care of it. Ref: mmc_berase()

So, I have a partition:

  2     0x00000300      0x000003ff      "test"
        attrs:  0x0000000000000000
        type:   9e312af1-18fe-fa41-45f3-37b3bb1d1061
        guid:   18a5d0db-d23a-aac1-0d4c-692c7ba9ab1c

and 'fastboot erase test' produces:
  Erasing blocks 1024 to 1024 due to alignment
  ........ erased 0 bytes from 'test'
which is not correct!

Furthermore, doesn't the mmc_berase() already handle the "erase_grp_size"....
If I remove your alignment logic, then it produces:
  Erasing blocks 768 to 1024 due to alignment

  Caution! Your devices Erase group is 0x400
  The erase range would be change to 0x0~0x7ff

  ........ erased 131072 bytes from 'test'
which looks correct (except for the "Caution" message)....

Thanks, Steve



+
+       printf("Erasing blocks " LBAFU " to " LBAFU " due to alignment\n",
+              blks_start, blks_start + blks_size);
+
+       blks = dev_desc->block_erase(dev_desc->dev, blks_start, blks_size);
+       if (blks != blks_size) {
+               error("failed erasing from device %d\n", dev_desc->dev);

no newline with error()
Will remove

+               fastboot_fail("failed erasing from device");
+               return;
+       }
+
+       printf("........ erased " LBAFU " bytes from '%s'\n",
+              blks_size * info.blksz, cmd);
+       fastboot_okay("");
+}
diff --git a/drivers/usb/gadget/f_fastboot.c b/drivers/usb/gadget/f_fastboot.c
index f7d84bf..a8d8205 100644
--- a/drivers/usb/gadget/f_fastboot.c
+++ b/drivers/usb/gadget/f_fastboot.c
@@ -535,6 +535,26 @@ static void cb_oem(struct usb_ep *ep, struct usb_request 
*req)
         }
   }

+static void cb_erase(struct usb_ep *ep, struct usb_request *req)
+{
+       char *cmd = req->buf;
+       char response[RESPONSE_LEN];
+
+       strsep(&cmd, ":");
+       if (!cmd) {
+               error("missing partition name\n");

no newline with error()
Will remove

+               fastboot_tx_write_str("FAILmissing partition name");
+               return;
+       }
+
+       strcpy(response, "FAILno flash device defined");
+
+#ifdef CONFIG_FASTBOOT_FLASH_MMC_DEV
+       fb_mmc_erase(cmd, response);
+#endif
+       fastboot_tx_write_str(response);
+}
+
   struct cmd_dispatch_info {
         char *cmd;
         void (*cb)(struct usb_ep *ep, struct usb_request *req);
@@ -566,6 +586,9 @@ static const struct cmd_dispatch_info cmd_dispatch_info[] = 
{
         {
                 .cmd = "oem",
                 .cb = cb_oem,
+       }, {
+               .cmd = "erase",
+               .cb = cb_erase,
         },
   };

diff --git a/include/fb_mmc.h b/include/fb_mmc.h
index 1ad1d13..402ba9b 100644
--- a/include/fb_mmc.h
+++ b/include/fb_mmc.h
@@ -6,3 +6,4 @@

   void fb_mmc_flash_write(const char *cmd, void *download_buffer,
                         unsigned int download_bytes, char *response);
+void fb_mmc_erase(const char *cmd, char *response);


Thanks for the review. Will send v2 with changes.

Regards,
Dileep

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to