On 04/02/15 10:15, Peng Fan wrote:
> If CONFIG_ARMV7_PSCI is not defined and CONFIG_ARMV7_SECURE_BASE is defined,
> smp_kicl_all_cpus may enable secondary cores and runs into secure_ram_addr(
> _smp_pen), before code is relocated to secure ram.
> So need relocation to secure ram before enable secondary cores.
>
> Signed-off-by: Peng Fan <peng....@freescale.com>
> ---
> arch/arm/cpu/armv7/virt-v7.c | 9 ++++++++-
> 1 file changed, 8 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/cpu/armv7/virt-v7.c b/arch/arm/cpu/armv7/virt-v7.c
> index b69fd37..4cb8806 100644
> --- a/arch/arm/cpu/armv7/virt-v7.c
> +++ b/arch/arm/cpu/armv7/virt-v7.c
> @@ -112,13 +112,20 @@ int armv7_init_nonsec(void)
> for (i = 1; i <= itlinesnr; i++)
> writel((unsigned)-1, gic_dist_addr + GICD_IGROUPRn + 4 * i);
>
> + /*
> + * Relocate secure section before any cpu runs in secure ram.
> + * smp_kick_all_cpus may enable other cores and runs into secure
> + * ram, so need to relocate secure section before enabling other
> + * cores.
> + */
> + relocate_secure_section();
> +
> #ifndef CONFIG_ARMV7_PSCI
> smp_set_core_boot_addr((unsigned long)secure_ram_addr(_smp_pen), -1);
> smp_kick_all_cpus();
> #endif
>
> /* call the non-sec switching code on this CPU also */
> - relocate_secure_section();
> secure_ram_addr(_nonsec_init)();
> return 0;
> }
>
Seems like a sensible thing to do. FWIW:
Acked-by: Marc Zyngier <marc.zyng...@arm.com>
M.
--
Jazz is not dead. It just smells funny...
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
