On Wed, Feb 19, 2014 at 10:21 AM, Philippe De Muyter <p...@macqel.be> wrote: > > This patch adds a phy driver for the Micrel KSZ8895 switch. As the SoC MAC > is directly connected to the switch MAC the link to the switch is always up. > > But the KSZ8895 switch can be hardwired in three configuration modes : > - not configurable with eventually an eeprom-stored configuration > - configurable by the mdio/mdc connection (SMI protocol) > - configurable by a SPI connection. > > In not configurable mode, the switch starts automatically, but in the > other modes, it must be started programmatically, by writing 1 in > configuration register 1. > We only support the not configurable and mdio/mdc (aka SMI) modes here. > > Signed-off-by: Philippe De Muyter <p...@macqel.be> > Cc: Christian Gmeiner <christian.gmei...@gmail.com> > ---
Huge apologies for the delay. Applied, Thanks! -Joe _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
