The mips32 copy of start.S now has everything required to also handle
mips64 builds. Move it to arch/mips/lib, use it for all builds & remove
the redundant mips64-specific version.
Signed-off-by: Paul Burton <paul.bur...@imgtec.com>
Cc: Daniel Schwierzeck <daniel.schwierz...@gmail.com>
---
arch/mips/Makefile | 3 +-
arch/mips/cpu/mips32/Makefile | 1 -
arch/mips/cpu/mips64/Makefile | 1 -
arch/mips/cpu/mips64/start.S | 291 ----------------------------------
arch/mips/lib/Makefile | 2 +
arch/mips/{cpu/mips32 => lib}/start.S | 0
6 files changed, 3 insertions(+), 295 deletions(-)
delete mode 100644 arch/mips/cpu/mips64/start.S
rename arch/mips/{cpu/mips32 => lib}/start.S (100%)
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 0a9e7e6..5a66979 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -2,8 +2,7 @@
# SPDX-License-Identifier: GPL-2.0+
#
-head-$(CONFIG_CPU_MIPS32) := arch/mips/cpu/mips32/start.o
-head-$(CONFIG_CPU_MIPS64) := arch/mips/cpu/mips64/start.o
+head-y := arch/mips/lib/start.o
libs-$(CONFIG_CPU_MIPS32) += arch/mips/cpu/mips32/
libs-$(CONFIG_CPU_MIPS64) += arch/mips/cpu/mips64/
diff --git a/arch/mips/cpu/mips32/Makefile b/arch/mips/cpu/mips32/Makefile
index 19d316a..9973cd3 100644
--- a/arch/mips/cpu/mips32/Makefile
+++ b/arch/mips/cpu/mips32/Makefile
@@ -5,7 +5,6 @@
# SPDX-License-Identifier: GPL-2.0+
#
-extra-y = start.o
obj-y = cpu.o interrupts.o time.o
obj-$(CONFIG_SOC_AU1X00) += au1x00/
diff --git a/arch/mips/cpu/mips64/Makefile b/arch/mips/cpu/mips64/Makefile
index cb4db9c..33fda36 100644
--- a/arch/mips/cpu/mips64/Makefile
+++ b/arch/mips/cpu/mips64/Makefile
@@ -5,5 +5,4 @@
# SPDX-License-Identifier: GPL-2.0+
#
-extra-y = start.o
obj-y = cpu.o interrupts.o time.o
diff --git a/arch/mips/cpu/mips64/start.S b/arch/mips/cpu/mips64/start.S
deleted file mode 100644
index 471bc1e..0000000
--- a/arch/mips/cpu/mips64/start.S
+++ /dev/null
@@ -1,291 +0,0 @@
-/*
- * Startup Code for MIPS64 CPU-core
- *
- * Copyright (c) 2003 Wolfgang Denk <w...@denx.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <asm-offsets.h>
-#include <config.h>
-#include <asm/regdef.h>
-#include <asm/mipsregs.h>
-
-#ifndef CONFIG_SYS_MIPS_CACHE_MODE
-#define CONFIG_SYS_MIPS_CACHE_MODE CONF_CM_CACHABLE_NONCOHERENT
-#endif
-
-#ifndef CONFIG_SYS_INIT_SP_ADDR
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \
- CONFIG_SYS_INIT_SP_OFFSET)
-#endif
-
-#ifdef CONFIG_SYS_LITTLE_ENDIAN
-#define MIPS64_R_INFO(ssym, r_type3, r_type2, r_type) \
- (((r_type) << 24) | ((r_type2) << 16) | ((r_type3) << 8) | (ssym))
-#else
-#define MIPS64_R_INFO(ssym, r_type3, r_type2, r_type) \
- ((r_type) | ((r_type2) << 8) | ((r_type3) << 16) | (ssym) << 24)
-#endif
-
- /*
- * For the moment disable interrupts, mark the kernel mode and
- * set ST0_KX so that the CPU does not spit fire when using
- * 64-bit addresses.
- */
- .macro setup_c0_status set clr
- .set push
- mfc0 t0, CP0_STATUS
- or t0, ST0_CU0 | \set | 0x1f | \clr
- xor t0, 0x1f | \clr
- mtc0 t0, CP0_STATUS
- .set noreorder
- sll zero, 3 # ehb
- .set pop
- .endm
-
- .set noreorder
-
- .globl _start
- .text
-_start:
- /* U-boot entry point */
- b reset
- nop
-
- .org 0x200
- /* TLB refill, 32 bit task */
-1: b 1b
- nop
-
- .org 0x280
- /* XTLB refill, 64 bit task */
-1: b 1b
- nop
-
- .org 0x300
- /* Cache error exception */
-1: b 1b
- nop
-
- .org 0x380
- /* General exception */
-1: b 1b
- nop
-
- .org 0x400
- /* Catch interrupt exceptions */
-1: b 1b
- nop
-
- .org 0x480
- /* EJTAG debug exception */
-1: b 1b
- nop
-
- .align 4
-reset:
-
- /* Clear watch registers */
- dmtc0 zero, CP0_WATCHLO
- dmtc0 zero, CP0_WATCHHI
-
- /* WP(Watch Pending), SW0/1 should be cleared */
- mtc0 zero, CP0_CAUSE
-
- setup_c0_status ST0_KX 0
-
- /* Init Timer */
- mtc0 zero, CP0_COUNT
- mtc0 zero, CP0_COMPARE
-
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
- /* CONFIG0 register */
- dli t0, CONF_CM_UNCACHED
- mtc0 t0, CP0_CONFIG
-#endif
-
- /*
- * Initialize $gp, force 8 byte alignment of bal instruction to forbid
- * the compiler to put nop's between bal and _gp. This is required to
- * keep _gp and ra aligned to 8 byte.
- */
- .align 3
- bal 1f
- nop
- .dword _gp
-1:
- ld gp, 0(ra)
-
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
- /* Initialize any external memory */
- dla t9, lowlevel_init
- jalr t9
- nop
-
- /* Initialize caches... */
- dla t9, mips_cache_reset
- jalr t9
- nop
-
- /* ... and enable them */
- dli t0, CONFIG_SYS_MIPS_CACHE_MODE
- mtc0 t0, CP0_CONFIG
-#endif
-
- /* Set up temporary stack */
- dli t0, -16
- dli t1, CONFIG_SYS_INIT_SP_ADDR
- and sp, t1, t0 # force 16 byte alignment
- dsub sp, sp, GD_SIZE # reserve space for gd
- and sp, sp, t0 # force 16 byte alignment
- move k0, sp # save gd pointer
-#ifdef CONFIG_SYS_MALLOC_F_LEN
- dli t2, CONFIG_SYS_MALLOC_F_LEN
- dsub sp, sp, t2 # reserve space for early malloc
- and sp, sp, t0 # force 16 byte alignment
-#endif
- move fp, sp
-
- /* Clear gd */
- move t0, k0
-1:
- sw zero, 0(t0)
- blt t0, t1, 1b
- daddi t0, 4
-
-#ifdef CONFIG_SYS_MALLOC_F_LEN
- daddu t0, k0, GD_MALLOC_BASE # gd->malloc_base offset
- sw sp, 0(t0)
-#endif
-
- dla t9, board_init_f
- jr t9
- move ra, zero
-
-/*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
- *
- * a0 = addr_sp
- * a1 = gd
- * a2 = destination address
- */
- .globl relocate_code
- .ent relocate_code
-relocate_code:
- move sp, a0 # set new stack pointer
- move fp, sp
-
- move s0, a1 # save gd in s0
- move s2, a2 # save destination address in s2
-
- dli t0, CONFIG_SYS_MONITOR_BASE
- dsub s1, s2, t0 # s1 <-- relocation offset
-
- dla t3, in_ram
- ld t2, -24(t3) # t2 <-- __image_copy_end
- move t1, a2
-
- dadd gp, s1 # adjust gp
-
- /*
- * t0 = source address
- * t1 = target address
- * t2 = source end address
- */
-1:
- lw t3, 0(t0)
- sw t3, 0(t1)
- daddu t0, 4
- blt t0, t2, 1b
- daddu t1, 4
-
- /* If caches were enabled, we would have to flush them here. */
- dsub a1, t1, s2 # a1 <-- size
- dla t9, flush_cache
- jalr t9
- move a0, s2 # a0 <-- destination address
-
- /* Jump to where we've relocated ourselves */
- daddi t0, s2, in_ram - _start
- jr t0
- nop
-
- .dword __rel_dyn_end
- .dword __rel_dyn_start
- .dword __image_copy_end
- .dword _GLOBAL_OFFSET_TABLE_
- .dword num_got_entries
-
-in_ram:
- /*
- * Now we want to update GOT.
- *
- * GOT[0] is reserved. GOT[1] is also reserved for the dynamic object
- * generated by GNU ld. Skip these reserved entries from relocation.
- */
- ld t3, -8(t0) # t3 <-- num_got_entries
- ld t8, -16(t0) # t8 <-- _GLOBAL_OFFSET_TABLE_
- dadd t8, s1 # t8 now holds relocated _G_O_T_
- daddi t8, t8, 16 # skipping first two entries
- dli t2, 2
-1:
- ld t1, 0(t8)
- beqz t1, 2f
- dadd t1, s1
- sd t1, 0(t8)
-2:
- daddi t2, 1
- blt t2, t3, 1b
- daddi t8, 8
-
- /* Update dynamic relocations */
- ld t1, -32(t0) # t1 <-- __rel_dyn_start
- ld t2, -40(t0) # t2 <-- __rel_dyn_end
-
- b 2f # skip first reserved entry
- daddi t1, 16
-
-1:
- lw t8, -4(t1) # t8 <-- relocation info
-
- dli t3, MIPS64_R_INFO(0x00, 0x00, 0x12, 0x03)
- bne t8, t3, 2f # skip non R_MIPS_REL32 entries
- nop
-
- ld t3, -16(t1) # t3 <-- location to fix up in FLASH
-
- ld t8, 0(t3) # t8 <-- original pointer
- dadd t8, s1 # t8 <-- adjusted pointer
-
- dadd t3, s1 # t3 <-- location to fix up in RAM
- sd t8, 0(t3)
-
-2:
- blt t1, t2, 1b
- daddi t1, 16 # each rel.dyn entry is 16 bytes
-
- /*
- * Clear BSS
- *
- * GOT is now relocated. Thus __bss_start and __bss_end can be
- * accessed directly via $gp.
- */
- dla t1, __bss_start # t1 <-- __bss_start
- dla t2, __bss_end # t2 <-- __bss_end
-
-1:
- sd zero, 0(t1)
- blt t1, t2, 1b
- daddi t1, 8
-
- move a0, s0 # a0 <-- gd
- move a1, s2
- dla t9, board_init_r
- jr t9
- move ra, zero
-
- .end relocate_code
diff --git a/arch/mips/lib/Makefile b/arch/mips/lib/Makefile
index ac536da..8caa93f 100644
--- a/arch/mips/lib/Makefile
+++ b/arch/mips/lib/Makefile
@@ -5,6 +5,8 @@
# SPDX-License-Identifier: GPL-2.0+
#
+extra-y = start.o
+
obj-y += cache.o
obj-y += cache_init.o
obj-y += io.o
diff --git a/arch/mips/cpu/mips32/start.S b/arch/mips/lib/start.S
similarity index 100%
rename from arch/mips/cpu/mips32/start.S
rename to arch/mips/lib/start.S
--
2.2.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
