On Tue, Jan 27, 2015 at 02:43:57PM +0100, Michal Simek wrote: > Hi guys, > > 2014-11-24 23:10 GMT+01:00 Tom Rini <tr...@ti.com>: > > > On Tue, Nov 11, 2014 at 07:03:55PM +0100, Stefan Roese wrote: > > > > > We had the problem on an AM33xx platform, that SPL detected an > > > unsupported boot-device. But since this message is a debug message > > > it took a bit of time to really know, where the hangup in SPL > > > resulted from. So let's change this debug message to a printf > > > and also print the detected boot-device that is not supported. > > > This makes debugging of such cases much easier. > > > > > > Signed-off-by: Stefan Roese <s...@denx.de> > > > Cc: Wolfgang Denk <w...@denx.de> > > > Cc: Tom Rini <tr...@ti.com> > > > Acked-by: Heiko Schocher <h...@denx.de> > > > > Applied to u-boot/master, thanks! > > > > > This patch is causing problem on Microblaze because SPL exceed 4k limit. > It is only one printf which is called in entire SPL that's why this should > be solved a little bit differently.
OK, but for clarity you need and are using both CONFIG_SPL_SERIAL_SUPPORT and CONFIG_SPL_LIBCOMMON_SUPPORT because you're using puts but not printf, yes? -- Tom
signature.asc
Description: Digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
