The Polaris board is based on the TrizepsIV module of
Keith & Koep (http://www.keith-koep.com).
Signed-off-by: Stefano Babic <sba...@denx.de>
---
MAINTAINERS | 4 ++++
Makefile | 7 ++++++-
board/trizepsiv/conxs.c | 27 +++++++++++++++------------
include/configs/trizepsiv.h | 28 +++++++++++++++++++++++-----
4 files changed, 48 insertions(+), 18 deletions(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index 9379c7e..97476e9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -500,6 +500,10 @@ Rowel Atienza <ro...@diwalabs.com>
armadillo ARM720T
+Stefano Babic <sba...@denx.de>
+
+ trizepsiv xscale
+
Dirk Behme <dirk.be...@gmail.com>
omap3_beagle ARM CORTEX-A8 (OMAP3530 SoC)
diff --git a/Makefile b/Makefile
index acec1a0..3a77988 100644
--- a/Makefile
+++ b/Makefile
@@ -3082,8 +3082,13 @@ scpu_config: unconfig
pxa255_idp_config: unconfig
@$(MKCONFIG) $(@:_config=) arm pxa pxa255_idp
+polaris_config \
trizepsiv_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm pxa trizepsiv
+ @mkdir -p $(obj)include
+ @if [ "$(findstring polaris,$@)" ] ; then \
+ echo "#define CONFIG_POLARIS 1" >>$(obj)include/config.h ; \
+ fi;
+ @$(MKCONFIG) -a trizepsiv arm pxa trizepsiv
wepep250_config : unconfig
@$(MKCONFIG) $(@:_config=) arm pxa wepep250
diff --git a/board/trizepsiv/conxs.c b/board/trizepsiv/conxs.c
index 5c0eb41..8c11456 100644
--- a/board/trizepsiv/conxs.c
+++ b/board/trizepsiv/conxs.c
@@ -44,13 +44,18 @@ extern struct serial_device serial_ffuart_device;
extern struct serial_device serial_btuart_device;
extern struct serial_device serial_stuart_device;
+#if CONFIG_POLARIS
+#define BOOT_CONSOLE "serial_stuart"
+#else
+#define BOOT_CONSOLE "serial_ffuart"
+#endif
/* ------------------------------------------------------------------------- */
/*
* Miscelaneous platform dependent initialisations
*/
-void usb_board_init(void)
+int usb_board_init(void)
{
UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
~(UHCHR_SSEP0 | UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE);
@@ -71,6 +76,8 @@ void usb_board_init(void)
/* Set port power control mask bits, only 3 ports. */
UHCRHDB |= (0x7<<17);
+
+ return 0;
}
void usb_board_init_fail(void)
@@ -89,7 +96,6 @@ void usb_board_stop(void)
CKEN &= ~CKEN10_USBHOST;
- puts("Called USB STOP\n");
return;
}
@@ -112,17 +118,14 @@ int board_late_init(void)
#if defined(CONFIG_SERIAL_MULTI)
char *console=getenv("boot_console");
- if ((strcmp(console,"serial_btuart") == 0) ||
- (strcmp(console,"serial_stuart") == 0) ||
- (strcmp(console,"serial_ffuart") == 0)) {
- setenv("stdout",console);
- setenv("stdin", console);
- setenv("stderr",console);
- } else {
- setenv("stdout", "serial");
- setenv("stdin", "serial");
- setenv("stderr", "serial");
+ if ((console == NULL) || (strcmp(console,"serial_btuart") &&
+ strcmp(console,"serial_stuart") &&
+ strcmp(console,"serial_ffuart"))) {
+ console = BOOT_CONSOLE;
}
+ setenv("stdout",console);
+ setenv("stdin", console);
+ setenv("stderr",console);
#endif
return 0;
}
diff --git a/include/configs/trizepsiv.h b/include/configs/trizepsiv.h
index bfa7157..170d080 100644
--- a/include/configs/trizepsiv.h
+++ b/include/configs/trizepsiv.h
@@ -93,7 +93,6 @@
#undef CONFIG_SHOW_BOOT_PROGRESS
#define CONFIG_BOOTDELAY 3
-#define CONFIG_SERVERIP 192.168.1.99
#define CONFIG_BOOTCOMMAND "run boot_flash"
#define CONFIG_BOOTARGS "console=ttyS0,38400
ramdisk_size=12288"\
" rw root=/dev/ram initrd=0xa0800000,5m"
@@ -239,11 +238,17 @@
#define CONFIG_SYS_GRER1_VAL 0x00000000
#define CONFIG_SYS_GRER2_VAL 0x00000000
#define CONFIG_SYS_GRER3_VAL 0x00000000
-#define CONFIG_SYS_GFER0_VAL 0x00000000
+
#define CONFIG_SYS_GFER1_VAL 0x00000000
-#define CONFIG_SYS_GFER2_VAL 0x00000000
#define CONFIG_SYS_GFER3_VAL 0x00000020
+#if CONFIG_POLARIS
+#define CONFIG_SYS_GFER0_VAL 0x00000001
+#define CONFIG_SYS_GFER2_VAL 0x00200000
+#else
+#define CONFIG_SYS_GFER0_VAL 0x00000000
+#define CONFIG_SYS_GFER2_VAL 0x00000000
+#endif
#define CONFIG_SYS_PSSR_VAL 0x20 /* CHECK */
@@ -259,7 +264,11 @@
#define CONFIG_SYS_MSC0_VAL 0x4df84df0
#define CONFIG_SYS_MSC1_VAL 0x7ff87ff4
+#if CONFIG_POLARIS
+#define CONFIG_SYS_MSC2_VAL 0xa2697ff8
+#else
#define CONFIG_SYS_MSC2_VAL 0xa26936d4
+#endif
#define CONFIG_SYS_MDCNFG_VAL 0x880009C9
#define CONFIG_SYS_MDREFR_VAL 0x20ca201e
#define CONFIG_SYS_MDMRS_VAL 0x00220022
@@ -278,9 +287,15 @@
#define CONFIG_SYS_MCIO0_VAL 0x00008407
#define CONFIG_SYS_MCIO1_VAL 0x0000c108
-#define CONFIG_NET_MULTI 1
+#define CONFIG_NET_MULTI 0
#define CONFIG_DRIVER_DM9000 1
-#define CONFIG_DM9000_BASE 0x08000000
+
+#if CONFIG_POLARIS
+#define CONFIG_DM9000_BASE 0x0C800000
+#else
+#define CONFIG_DM9000_BASE 0x08000000
+#endif
+
#define DM9000_IO CONFIG_DM9000_BASE
#define DM9000_DATA (CONFIG_DM9000_BASE+0x8004)
@@ -312,6 +327,9 @@
/* write flash less slowly */
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
+/* Unlock to be used with Intel chips */
+#define CONFIG_SYS_FLASH_PROTECTION 1
+
/* Flash environment locations */
#define CONFIG_ENV_IS_IN_FLASH 1
#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + CONFIG_SYS_MONITOR_LEN)
/* Addr of Environment Sector */
--
1.6.0.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
