Hi Adam, On 25 January 2015 at 08:24, Adam Sampson <a...@offog.org> wrote: > This is a low-cost Allwinner A20 board with Arduino-style GPIO headers; > it features 1G RAM, 4G NAND flash, 1 micro-SD, 2 USB sockets, 1 micro > USB socket for OTG and another for power in, HDMI, SATA, 5V power for > SATA devices, gigabit Ethernet, an IR receiver, 3.5mm audio out and a > MIPI camera connector. > > For more details, see: http://linux-sunxi.org/LinkSprite_pcDuino3_Nano > > Signed-off-by: Adam Sampson <a...@offog.org> > --- > board/sunxi/MAINTAINERS | 5 +++++ > configs/Linksprite_pcDuino3_Nano_defconfig | 11 +++++++++++ > 2 files changed, 16 insertions(+) > create mode 100644 configs/Linksprite_pcDuino3_Nano_defconfig > > diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS > index 743e7f5..479d147 100644 > --- a/board/sunxi/MAINTAINERS > +++ b/board/sunxi/MAINTAINERS > @@ -100,3 +100,8 @@ MELE M5 BOARD > M: Ian Campbell <i...@hellion.org.uk> > S: Maintained > F: configs/Mele_M5_defconfig > + > +LINKSPRITE-PCDUINO3-NANO BOARD > +M: Adam Sampson <a...@offog.org> > +S: Maintained > +F: configs/Linksprite_pcDuino3_Nano_defconfig > diff --git a/configs/Linksprite_pcDuino3_Nano_defconfig > b/configs/Linksprite_pcDuino3_Nano_defconfig > new file mode 100644 > index 0000000..22435eb > --- /dev/null > +++ b/configs/Linksprite_pcDuino3_Nano_defconfig > @@ -0,0 +1,11 @@ > +CONFIG_SPL=y > +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPH(2),USB_EHCI" > +CONFIG_FDTFILE="sun7i-a20-pcduino3-nano.dtb" > +CONFIG_USB1_VBUS_PIN="PH11" > ++S:CONFIG_ARM=y > ++S:CONFIG_ARCH_SUNXI=y > ++S:CONFIG_MACH_SUN7I=y > ++S:CONFIG_TARGET_PCDUINO3_NANO=y > ++S:CONFIG_DRAM_CLK=408 > ++S:CONFIG_DRAM_ZQ=122 > ++S:CONFIG_DRAM_EMR1=4
Since this is a new board, could it follow along ith the Linksprice pcDuino3 and support driver rmodel / device tree? Regards, Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
