On Wednesday, January 21, 2015 at 12:55:18 PM, Graeme Russ wrote:
> Signed-off-by: Graeme Russ <gr...@tss-engineering.com>
Commit message again ;-)
[...]
> diff --git a/board/reachtech/g2c1/g2c1.c b/board/reachtech/g2c1/g2c1.c
> new file mode 100644
> index 0000000..5bf437d
> --- /dev/null
> +++ b/board/reachtech/g2c1/g2c1.c
> @@ -0,0 +1,79 @@
[...]
> +#ifdef CONFIG_CMD_MMC
> +
> +int board_mmc_init(bd_t *bis)
> +{
> + return mxsmmc_initialize(bis, 0, NULL /* g2c1_mmc_wp */, NULL);
Where's the WP function?
> +}
> +#endif
> diff --git a/board/reachtech/g2c1/spl_boot.c
> b/board/reachtech/g2c1/spl_boot.c new file mode 100644
> index 0000000..25ee0e2
> --- /dev/null
> +++ b/board/reachtech/g2c1/spl_boot.c
> @@ -0,0 +1,452 @@
> +/*
> + * DENX M28 Boot setup
> + *
> + * Copyright (C) 2011 Marek Vasut <marek.va...@gmail.com>
> + * on behalf of DENX Software Engineering GmbH
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <config.h>
> +#include <asm/io.h>
> +#include <asm/arch/iomux-mx28.h>
> +#include <asm/arch/imx-regs.h>
> +#include <asm/arch/sys_proto.h>
> +
> +/*
> + * Bank. SoC
> + * Pin Pin Function Comments
All this stuff should be in some README instead .
[...]
> +#define CONFIG_EXTRA_ENV_SETTINGS \
> + "consdev=ttyAMA0\0" \
> + "baudrate=115200\0" \
> + "bootscript=boot.scr\0" \
> + "bootdev=/dev/mmcblk0p2\0" \
> + "rootdev=/dev/mmcblk0p3\0" \
> + "netdev=eth0\0" \
> + "hostname=g2c1\0" \
> + "rootpath=/opt/eldk-5.5/armv5te/rootfs-qte-sdk\0" \
Remove this rootpath var from here.
Thanks!
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
