This patch fixes the following compilation warning for maxbcm:
Building maxbcm board...
text data bss dec hex filename
160075 6596 38240 204911 3206f ./u-boot
board/maxbcm/maxbcm.c: In function 'reset_phy':
board/maxbcm/maxbcm.c:68:6: warning: unused variable 'reg' [-Wunused-variable]
u16 reg;
^
board/maxbcm/maxbcm.c:66:6: warning: unused variable 'devadr'
[-Wunused-variable]
u16 devadr = CONFIG_PHY_BASE_ADDR;
^
Additionally support Spansion SPI NOR flash is added. With larger SPI device
support via the CONFIG_SPI_FLASH_BAR define.
Signed-off-by: Stefan Roese <s...@denx.de>
---
Changes in v2: None
board/maxbcm/maxbcm.c | 2 --
include/configs/maxbcm.h | 2 ++
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/board/maxbcm/maxbcm.c b/board/maxbcm/maxbcm.c
index 7fc83ee..94c688f 100644
--- a/board/maxbcm/maxbcm.c
+++ b/board/maxbcm/maxbcm.c
@@ -63,9 +63,7 @@ int checkboard(void)
/* Configure and enable MV88E6185 switch */
void reset_phy(void)
{
- u16 devadr = CONFIG_PHY_BASE_ADDR;
char *name = "neta0";
- u16 reg;
if (miiphy_set_current_dev(name))
return;
diff --git a/include/configs/maxbcm.h b/include/configs/maxbcm.h
index 72217bd..005e136 100644
--- a/include/configs/maxbcm.h
+++ b/include/configs/maxbcm.h
@@ -43,6 +43,8 @@
#define CONFIG_SF_DEFAULT_SPEED 1000000
#define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
#define CONFIG_SPI_FLASH_STMICRO
+#define CONFIG_SPI_FLASH_SPANSION
+#define CONFIG_SPI_FLASH_BAR
/* Environment in SPI NOR flash */
#define CONFIG_ENV_IS_IN_SPI_FLASH
--
2.2.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
