On 1/19/2015 4:16 PM, Bo Shen wrote:
Hi Josh,
On 01/19/2015 03:06 PM, Josh Wu wrote:
This patch will save U-Boot environment as a file: uboot.env, in FAT
partition
instead of saving it in raw sector of MMC card.
This make us easier to manage the environment file.
Signed-off-by: Josh Wu <josh...@atmel.com>
After you remove the duplicated definition.
Acked-by: Bo Shen <voice.s...@atmel.com>
Thanks.
---
include/configs/sama5d3_xplained.h | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/include/configs/sama5d3_xplained.h
b/include/configs/sama5d3_xplained.h
index d5588b1..a697035 100644
--- a/include/configs/sama5d3_xplained.h
+++ b/include/configs/sama5d3_xplained.h
@@ -169,13 +169,15 @@
"bootz 0x22000000 - 0x21000000"
#elif CONFIG_SYS_USE_MMC
/* bootstrap + u-boot + env in sd card */
-#define CONFIG_ENV_IS_IN_MMC
-#define CONFIG_ENV_OFFSET 0x2000
-#define CONFIG_ENV_SIZE 0x1000
+#define CONFIG_ENV_IS_IN_FAT
+#define CONFIG_FAT_WRITE
This has been defined in
--->8---
#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
#define CONFIG_CMD_FAT
#define CONFIG_FAT_WRITE
---<8---
Okay, you are right. Will do.
Best Regards,
Josh Wu
+#define FAT_ENV_INTERFACE "mmc"
+#define FAT_ENV_FILE "uboot.env"
+#define FAT_ENV_DEVICE_AND_PART "0"
+#define CONFIG_ENV_SIZE 0x4000
#define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x21000000
at91-sama5d3_xplained.dtb; " \
"fatload mmc 0:1 0x22000000 zImage; " \
"bootz 0x22000000 - 0x21000000"
-#define CONFIG_SYS_MMC_ENV_DEV 0
#else
#define CONFIG_ENV_IS_NOWHERE
#endif
Best Regards,
Bo Shen
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
