On Tue, 13 Jan 2015 13:33:32 +0100 Hans de Goede <hdego...@redhat.com> wrote:
> While running some tests with an Olinuxino-A13-Micro + a 7" Olimex LCD module > I noticed that the screen flickered. This is caused by the lcd display clk > phase reg value being set to 0, where it should be 1 in this setup. > > This commit adds a Kconfig option for the lcd display clk phase, so that we > can set it per board. This defaults to 1, because looking at all the fex > files in sunxi-boards, that is by far the most used value. What is the name of this option in fex files? > This commit updated the Ippo and MSI Primo73 tablet defconfigs to override the > default of 1 with 0, as that is the correct value for those tablets, this > keeps the register settings the same as before this commit. > > The Olinuxino-A13 defconfigs are not updated, changing the register setting > for these boards from 0 to 1, this is intentional. [...] -- Best regards, Siarhei Siamashka _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
