Add initial sun9i (A80) support, only uart + mmc are supported for now.

Signed-off-by: Hans de Goede <hdego...@redhat.com>
---
 arch/arm/cpu/armv7/sunxi/Makefile        |  2 ++
 arch/arm/cpu/armv7/sunxi/board.c         |  4 ++++
 arch/arm/cpu/armv7/sunxi/cpu_info.c      |  5 +++++
 arch/arm/cpu/armv7/sunxi/lowlevel_init.S | 12 +++++++++++-
 arch/arm/include/asm/arch-sunxi/gpio.h   |  3 +++
 board/sunxi/Kconfig                      |  5 +++++
 include/configs/sun9i.h                  | 23 +++++++++++++++++++++++
 7 files changed, 53 insertions(+), 1 deletion(-)
 create mode 100644 include/configs/sun9i.h

diff --git a/arch/arm/cpu/armv7/sunxi/Makefile 
b/arch/arm/cpu/armv7/sunxi/Makefile
index 27264f5..6602cda 100644
--- a/arch/arm/cpu/armv7/sunxi/Makefile
+++ b/arch/arm/cpu/armv7/sunxi/Makefile
@@ -13,7 +13,9 @@ obj-y += board.o
 obj-y  += clock.o
 obj-y  += cpu_info.o
 obj-y  += pinmux.o
+ifndef CONFIG_MACH_SUN9I
 obj-y  += usbc.o
+endif
 obj-$(CONFIG_MACH_SUN6I)       += prcm.o
 obj-$(CONFIG_MACH_SUN8I)       += prcm.o
 obj-$(CONFIG_MACH_SUN6I)       += p2wi.o
diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c
index 4449942..0108a14 100644
--- a/arch/arm/cpu/armv7/sunxi/board.c
+++ b/arch/arm/cpu/armv7/sunxi/board.c
@@ -71,6 +71,10 @@ int gpio_init(void)
        sunxi_gpio_set_cfgpin(SUNXI_GPH(20), SUN6I_GPH20_UART0_TX);
        sunxi_gpio_set_cfgpin(SUNXI_GPH(21), SUN6I_GPH21_UART0_RX);
        sunxi_gpio_set_pull(SUNXI_GPH(21), SUNXI_GPIO_PULL_UP);
+#elif CONFIG_CONS_INDEX == 1 && defined(CONFIG_MACH_SUN9I)
+       sunxi_gpio_set_cfgpin(SUNXI_GPH(12), SUN9I_GPH12_UART0_TX);
+       sunxi_gpio_set_cfgpin(SUNXI_GPH(13), SUN9I_GPH13_UART0_RX);
+       sunxi_gpio_set_pull(SUNXI_GPH(13), SUNXI_GPIO_PULL_UP);
 #elif CONFIG_CONS_INDEX == 2 && defined(CONFIG_MACH_SUN5I)
        sunxi_gpio_set_cfgpin(SUNXI_GPG(3), SUN5I_GPG3_UART1_TX);
        sunxi_gpio_set_cfgpin(SUNXI_GPG(4), SUN5I_GPG4_UART1_RX);
diff --git a/arch/arm/cpu/armv7/sunxi/cpu_info.c 
b/arch/arm/cpu/armv7/sunxi/cpu_info.c
index b6cb9de..09ea7f2 100644
--- a/arch/arm/cpu/armv7/sunxi/cpu_info.c
+++ b/arch/arm/cpu/armv7/sunxi/cpu_info.c
@@ -11,6 +11,7 @@
 #include <asm/arch/cpu.h>
 #include <asm/arch/clock.h>
 #include <axp221.h>
+#include <errno.h>
 
 #ifdef CONFIG_MACH_SUN6I
 int sunxi_get_ss_bonding_id(void)
@@ -66,6 +67,8 @@ int print_cpuinfo(void)
        puts("CPU:   Allwinner A20 (SUN7I)\n");
 #elif defined CONFIG_MACH_SUN8I
        puts("CPU:   Allwinner A23 (SUN8I)\n");
+#elif defined CONFIG_MACH_SUN9I
+       puts("CPU:   Allwinner A80 (SUN9I)\n");
 #else
 #warning Please update cpu_info.c with correct CPU information
        puts("CPU:   SUNXI Family\n");
@@ -82,6 +85,8 @@ int sunxi_get_sid(unsigned int *sid)
 #else
        return -ENODEV;
 #endif
+#elif defined CONFIG_MACH_SUN9I
+       return -ENODEV; /* Not supported yet */
 #else
        int i;
 
diff --git a/arch/arm/cpu/armv7/sunxi/lowlevel_init.S 
b/arch/arm/cpu/armv7/sunxi/lowlevel_init.S
index b80b3eb..8a069f7 100644
--- a/arch/arm/cpu/armv7/sunxi/lowlevel_init.S
+++ b/arch/arm/cpu/armv7/sunxi/lowlevel_init.S
@@ -14,10 +14,20 @@
  */
 ENTRY(save_boot_params)
 #if defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN7I || \
-    defined CONFIG_MACH_SUN8I
+    defined CONFIG_MACH_SUN8I || defined CONFIG_MACH_SUN9I
        mrc     p15, 0, r0, c1, c0, 1
        orr     r0, r0, #(1<<6)
        mcr     p15, 0, r0, c1, c0, 1
 #endif
+#if defined CONFIG_MACH_SUN9I
+       /*
+        * Dark magic poke of some register in the SYS_CTRL region.
+        * Allwinners own u-boot does this and without this u-boot causes a
+        * CPU / system reset as soon as it loads.
+        */
+       ldr     r0, =0x008000e0
+       ldr     r1, =0x16aa0001
+       str     r1, [r0]
+#endif
        bx      lr
 ENDPROC(save_boot_params)
diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h 
b/arch/arm/include/asm/arch-sunxi/gpio.h
index 71cc879..3db7fd3 100644
--- a/arch/arm/include/asm/arch-sunxi/gpio.h
+++ b/arch/arm/include/asm/arch-sunxi/gpio.h
@@ -174,6 +174,9 @@ enum sunxi_gpio_number {
 
 #define SUN4I_GPH22_SDC1       5
 
+#define SUN9I_GPH12_UART0_TX   2
+#define SUN9I_GPH13_UART0_RX   2
+
 #define SUN6I_GPH20_UART0_TX   2
 #define SUN6I_GPH21_UART0_RX   2
 
diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index 847a86f..e65b8af 100644
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -31,6 +31,10 @@ config MACH_SUN8I
        select CPU_V7
        select SUPPORT_SPL
 
+config MACH_SUN9I
+       bool "sun9i (Allwinner A80)"
+       select CPU_V7
+
 endchoice
 
 if MACH_SUN6I || MACH_SUN8I
@@ -56,6 +60,7 @@ config SYS_CONFIG_NAME
        default "sun6i" if MACH_SUN6I
        default "sun7i" if MACH_SUN7I
        default "sun8i" if MACH_SUN8I
+       default "sun9i" if MACH_SUN9I
 
 choice
        prompt "Board"
diff --git a/include/configs/sun9i.h b/include/configs/sun9i.h
new file mode 100644
index 0000000..3fcf477
--- /dev/null
+++ b/include/configs/sun9i.h
@@ -0,0 +1,23 @@
+/*
+ * (C) Copyright 2015 Hans de Goede <hdego...@redhat.com>
+ *
+ * Configuration settings for the Allwinner A80 (sun9i) CPU
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * A80 specific configuration
+ */
+
+#define CONFIG_SYS_PROMPT      "sun9i# "
+
+/*
+ * Include common sunxi configuration where most the settings are
+ */
+#include <configs/sunxi-common.h>
+
+#endif /* __CONFIG_H */
-- 
2.1.0

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to