exynos5_get_periph_rate function reads incorrect div for
SDMMC2 & 3. It also reads prediv and does division only for
SDMMC0 & 2 when actually various other peripherals need that.
Adding changes to fix these mistakes in periph rate calculation.
Signed-off-by: Akshay Saraswat <aksha...@samsung.com>
---
Changes since v1:
- New patch.
arch/arm/cpu/armv7/exynos/clock.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/arch/arm/cpu/armv7/exynos/clock.c
b/arch/arm/cpu/armv7/exynos/clock.c
index 1ef4f49..a43e5af 100644
--- a/arch/arm/cpu/armv7/exynos/clock.c
+++ b/arch/arm/cpu/armv7/exynos/clock.c
@@ -406,10 +406,13 @@ static unsigned long exynos5_get_periph_rate(int
peripheral)
break;
case PERIPH_ID_SDMMC0:
case PERIPH_ID_SDMMC1:
+ src = readl(&clk->src_fsys);
+ div = readl(&clk->div_fsys1);
+ break;
case PERIPH_ID_SDMMC2:
case PERIPH_ID_SDMMC3:
src = readl(&clk->src_fsys);
- div = readl(&clk->div_fsys1);
+ div = readl(&clk->div_fsys2);
break;
case PERIPH_ID_I2C0:
case PERIPH_ID_I2C1:
@@ -450,8 +453,7 @@ static unsigned long exynos5_get_periph_rate(int peripheral)
sub_div = (div >> bit_info->div_bit) & 0xf;
sub_clk = sclk / (sub_div + 1);
- /* Pre-ratio clock division for SDMMC0 and 2 */
- if (peripheral == PERIPH_ID_SDMMC0 || peripheral == PERIPH_ID_SDMMC2) {
+ if (bit_info->prediv_bit >= 0) {
div = (div >> bit_info->prediv_bit) & 0xff;
return sub_clk / (div + 1);
}
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
