On 01/05/2015 12:27 PM, Fabio Estevam wrote: > [Adding more folks on Cc] > > On Mon, Jan 5, 2015 at 3:35 PM, Ian Molton <imol...@ad-holdings.co.uk> wrote: >> Hi folks, >> >> I'm attempting to bring up a custom board with an i.mx6q on it. >> >> I've added support for PCIe and E1000 ethernet, and the PCI bus scans, >> showing my card (Intel i210 chip) >> >> The E1000 driver bombs out during init, however. >> >> I've tried inserting code to repeatedly read the BAR for 4k (and print a >> ".") after bus mastering is enabled, and this manages about 70 cycles >> before I no longer see serial output. >> >> if I reset the board, I may or may not get any "." printed, and >> sometimes I get completely other characters printed (perhaps serial is >> losing sync?). >> >> Anyone have any ideas ? > > York Sun has also reported issues with this driver: > http://lists.denx.de/pipermail/u-boot/2014-October/190602.html >
To clarify, the issue I had was solved by fixing the driver, commit 76f8cdb2036bf86ec7193ed13129797f0a32d13d. York _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
