Now with switch to Kconfig it's possible to select commands via
menuconfig or defconfigs.
Moreover some commands are enabled by default in both
"config_cmd_default.h" as a legacy way and in "common/Kconfig".
And on attempt to build U-Boot following warnings are printed for
definitions made in both:
--->---
In file included from include/configs/arcangel4.h:45:0,
from include/config.h:4,
from include/common.h:18,
from examples/standalone/stubs.c:1:
include/config_cmd_default.h:20:0: warning: "CONFIG_CMD_BDI" redefined
[enabled by default]
#define CONFIG_CMD_BDI /* bdinfo */
^
In file included from ././include/linux/kconfig.h:4:0,
from <command-line>:0:
include/generated/autoconf.h:10:0: note: this is the location of the
previous definition
#define CONFIG_CMD_BDI 1
^
--->---
An obvious fix is to wrap all definitions in "config_cmd_default.h"
since we still have to keep it util we're done with complete switch to
Kconfig.
Signed-off-by: Alexey Brodkin <abrod...@synopsys.com>
Cc: Tom Rini <tr...@ti.com>
---
include/config_cmd_default.h | 42 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 42 insertions(+)
diff --git a/include/config_cmd_default.h b/include/config_cmd_default.h
index 73c9544..b33f21b 100644
--- a/include/config_cmd_default.h
+++ b/include/config_cmd_default.h
@@ -16,28 +16,70 @@
* hardware, not fully tested, etc.).
*/
+#ifndef CONFIG_CMD_BDI
#define CONFIG_CMD_BDI /* bdinfo */
+#endif
+#ifndef CONFIG_CMD_BOOTD
#define CONFIG_CMD_BOOTD /* bootd */
+#endif
+#ifndef CONFIG_CMD_CONSOLE
#define CONFIG_CMD_CONSOLE /* coninfo */
+#endif
+#ifndef CONFIG_CMD_ECHO
#define CONFIG_CMD_ECHO /* echo arguments */
+#endif
+#ifndef CONFIG_CMD_EDITENV
#define CONFIG_CMD_EDITENV /* editenv */
+#endif
+#ifndef CONFIG_CMD_FPGA
#define CONFIG_CMD_FPGA /* FPGA configuration Support */
+#endif
+#ifndef CONFIG_CMD_IMI
#define CONFIG_CMD_IMI /* iminfo */
+#endif
+#ifndef CONFIG_CMD_ITEST
#define CONFIG_CMD_ITEST /* Integer (and string) test */
+#endif
#ifndef CONFIG_SYS_NO_FLASH
+#ifndef CONFIG_CMD_FLASH
#define CONFIG_CMD_FLASH /* flinfo, erase, protect */
+#endif
+#ifndef CONFIG_CMD_IMLS
#define CONFIG_CMD_IMLS /* List all found images */
#endif
+#endif /* CONFIG_SYS_NO_FLASH */
+#ifndef CONFIG_CMD_LOADB
#define CONFIG_CMD_LOADB /* loadb */
+#endif
+#ifndef CONFIG_CMD_LOADS
#define CONFIG_CMD_LOADS /* loads */
+#endif
+#ifndef CONFIG_CMD_MEMORY
#define CONFIG_CMD_MEMORY /* md mm nm mw cp cmp crc base loop */
+#endif
+#ifndef CONFIG_CMD_MISC
#define CONFIG_CMD_MISC /* Misc functions like sleep etc*/
+#endif
+#ifndef CONFIG_CMD_NET
#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
+#endif
+#ifndef CONFIG_CMD_NFS
#define CONFIG_CMD_NFS /* NFS support */
+#endif
+#ifndef CONFIG_CMD_RUN
#define CONFIG_CMD_RUN /* run command in env variable */
+#endif
+#ifndef CONFIG_CMD_SAVEENV
#define CONFIG_CMD_SAVEENV /* saveenv */
+#endif
+#ifndef CONFIG_CMD_SETGETDCR
#define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */
+#endif
+#ifndef CONFIG_CMD_SOURCE
#define CONFIG_CMD_SOURCE /* "source" command support */
+#endif
+#ifndef CONFIG_CMD_XIMG
#define CONFIG_CMD_XIMG /* Load part of Multi Image */
+#endif
#endif /* _CONFIG_CMD_DEFAULT_H */
--
2.1.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
