Hi,
On 22-12-14 09:32, Michal Suchanek wrote:
On 20 December 2014 at 19:27, Hans de Goede <hdego...@redhat.com> wrote:
Hi All,
There are 3 topics which I would like to cover in this mail:
1) Switching over to upstream u-boot for the linux-sunxi project
2) How to build upstream u-boot for use with linux-sunxi sunxi-3.4 kernels
3) Adding more boards to upstream u-boot
1. Switching over to upstream u-boot for the linux-sunxi project
================================================================
Upstream u-boot has had sunxi support for a while now, and has slowly been
gaining a lot of features over the linux-sunxi/u-boot-sunxi version at:
https://github.com/linux-sunxi/u-boot-sunxi/
Some of the new features supported upstream are booting from usb, booting
from
sata (ahci) and full sun6i (A31) support including SPL support. Also
upstream
u-boot supports using hdmi out + an usb keyboard as u-boot console, so that
one does not need to solder a serial console to things like hdmi tv-dongles.
Upstream u-boot also has full sun8i (A23) support in the pipeline including
SPL support.
Since we have sun8i memory support is there corresponding meminfo
which can dump the timing?
No, just like with previous boards all boards seem to use the same timing
(tpr) values so I've simply hardcoded them. The only 2 things which can be
configured in the sun8i dram code or the dram-clk and the zq value, both
of which (so far) have been filled in in the fex files, so there is no reason
to read it back, moreover reading it back is impossible in the case of the zq
value, as that does not end up 1:1 in a register.
Regards,
Hans
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
