Hi Scott,
On Tue, 16 Dec 2014 00:24:06 -0600 Scott Wood <scottw...@freescale.com> wrote: > On Tue, 2014-12-16 at 07:21 +0100, Heiko Schocher wrote: > > Hello Tom, Scott, > > > > Am 16.12.2014 02:26, schrieb Tom Rini: > > > As we're neck deep in "See? Scott was right" I'm inclined to go with > > > what Scott is saying. We tried it, it actively didn't work, lets step > > > back, evaluate and move along. > > > > Ok, I have no objections against that, it was just my point of view ... > > > > And yes, I missed here and there some pieces when syncing with > > linux 3.14 ... sorry for that, but I could not test every scenario for > > every board ... and we had no clean base for using git, which at last > > in my attempt ended in a big mess when syncing with linux ... so I started > > more or less from scratch ... > > I understand that for some of the mtd parts, but the nand code did have > a relatively clean base. > > > So ... > > > > Who will send a "delete ifdef" patch? > > I will. Given that we have made a decision to turn around, no point of adding the ifdefs by this patch. V2 is now on our patchwork. http://patchwork.ozlabs.org/patch/421803/ Best Regards Masahiro Yamada _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot