Hi Lubomic,
> On Nov 11, 2014, at 12:25 , Lubomir Popov <lpo...@mm-sol.com> wrote:
>
> If print_mmc_devices() was called with a '\n' separator (as done
> for example by the "mmc list" command), it offset the 2-nd and
> all subsequent lines by one space. Fixing this.
>
> Signed-off-by: Lubomir Popov <l-po...@ti.com>
> ---
> drivers/mmc/mmc.c | 7 +++++--
> 1 file changed, 5 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
> index 44a4feb..e0ea833 100644
> --- a/drivers/mmc/mmc.c
> +++ b/drivers/mmc/mmc.c
> @@ -1401,8 +1401,11 @@ void print_mmc_devices(char separator)
>
> printf("%s: %d", m->cfg->name, m->block_dev.dev);
>
> - if (entry->next != &mmc_devices)
> - printf("%c ", separator);
> + if (entry->next != &mmc_devices) {
> + printf("%c", separator);
> + if (separator != '\n')
> + puts (" ");
> + }
> }
>
> printf("\n");
> --
> 1.7.9.5
>
Applied, thanks
— Pantelis
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
