On 12/09/2014 01:38 AM, Alison Wang wrote: > This patch adds NAND boot support for LS1021AQDS board. SPL > framework is used. PBL initialize the internal RAM and copy > SPL to it, then SPL initialize DDR using SPD and copy u-boot > from NAND flash to DDR, finally SPL transfer control to u-boot. > > Signed-off-by: Prabhakar Kushwaha <prabha...@freescale.com> > Signed-off-by: Alison Wang <alison.w...@freescale.com> > --- > Change log: > v2: Rebase the patch. > Add CONFIG_SYS_DCSR_DCFG_ADDR instead of CONFIG_SYS_DCSRBAR. >
Applied to u-boot-fsl-qoriq master, awaiting upstream. York _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
