Dear Kumar Gala,
In message <pine.lnx.4.64.0906121726170.19...@localhost.localdomain> you wrote:
> The following changes since commit 229549a56d9ae413c00f64fd7c728c6879a1b54b:
> Stefan Roese (1):
> mpc512x: MPC5121ADS: Add NAND support
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-mpc85xx.git next
>
> Haiying Wang (10):
> drivers/qe: Rename the camel-case identifiers in uec
> 85xx: Add QE clk support
> drivers/qe: Change QE RISC ALLOCATION to support 4 RISCs
> drivers/qe: Add more SNUM number for QE
> 85xx: Add UEC3 and UEC4 support for MPC8569MDS
> 85xx: Add RMII support for MPC8569MDS
> fsl: Update the number of ethxaddr in reading system eeprom
> qe: Pass in uec_info struct through uec_initialize
> drivers/qe: add sgmii support in for UEC driver
> 85xx: Add UEC6 and UEC8 at SGMII mode for MPC8569MDS
>
> Kumar Gala (2):
> 85xx: Always attempt ethernet device tree fixup
> 85xx: Added MPC8535/E identifiers
>
> Peter Tyser (6):
> fsl: Create common fsl_dma.h for 85xx and 86xx cpus
> fsl/85xx, 86xx: Sync up DMA code
> 85xx: Add PORBMSR and PORDEVSR shift defines
> xes: Update Freescale PCI code to work with 86xx processors
> xes: Update Freescale DDR code to work with 86xx processors
> xes: Update Freescale clock code to work with 86xx processors
>
> Srikanth Srinivasan (1):
> 85xx: Add P2020DS support
>
> MAKEALL | 2 +
> Makefile | 9 +
> board/freescale/common/sys_eeprom.c | 23 +-
> board/freescale/mpc8569mds/bcsr.c | 19 +-
> board/freescale/mpc8569mds/bcsr.h | 2 +-
> board/freescale/mpc8569mds/mpc8569mds.c | 126 ++++-
> board/freescale/p2020ds/Makefile | 54 ++
> board/freescale/p2020ds/config.mk | 32 +
> board/freescale/p2020ds/ddr.c | 130 ++++
> board/freescale/p2020ds/law.c | 42 ++
> board/freescale/p2020ds/p2020ds.c | 634 +++++++++++++++++
> board/freescale/p2020ds/tlb.c | 95 +++
> board/freescale/p2020ds/u-boot.lds | 143 ++++
> board/xes/common/Makefile | 7 +-
> .../xes/common/{fsl_8572_clk.c => fsl_8xxx_clk.c} | 8 +
> .../xes/common/{fsl_85xx_ddr.c => fsl_8xxx_ddr.c} | 8 +-
> .../xes/common/{fsl_85xx_pci.c => fsl_8xxx_pci.c} | 81 ++-
> cpu/mpc83xx/cpu.c | 20 +-
> cpu/mpc85xx/cpu.c | 60 +-
> cpu/mpc85xx/fdt.c | 3 -
> cpu/mpc85xx/speed.c | 15 +-
> cpu/mpc86xx/cpu.c | 35 +-
> drivers/qe/qe.c | 18 +-
> drivers/qe/qe.h | 18 +-
> drivers/qe/uec.c | 224 ++-----
> drivers/qe/uec.h | 56 ++-
> include/asm-ppc/fsl_dma.h | 51 ++
> include/asm-ppc/immap_85xx.h | 80 +--
> include/asm-ppc/immap_86xx.h | 78 +--
> include/asm-ppc/immap_qe.h | 13 +-
> include/asm-ppc/processor.h | 2 +
> include/configs/MPC8569MDS.h | 82 +++-
> include/configs/P2020DS.h | 741
> ++++++++++++++++++++
> include/e500.h | 1 +
> 34 files changed, 2493 insertions(+), 419 deletions(-)
> create mode 100644 board/freescale/p2020ds/Makefile
> create mode 100644 board/freescale/p2020ds/config.mk
> create mode 100644 board/freescale/p2020ds/ddr.c
> create mode 100644 board/freescale/p2020ds/law.c
> create mode 100644 board/freescale/p2020ds/p2020ds.c
> create mode 100644 board/freescale/p2020ds/tlb.c
> create mode 100644 board/freescale/p2020ds/u-boot.lds
> rename board/xes/common/{fsl_8572_clk.c => fsl_8xxx_clk.c} (86%)
> rename board/xes/common/{fsl_85xx_ddr.c => fsl_8xxx_ddr.c} (92%)
> rename board/xes/common/{fsl_85xx_pci.c => fsl_8xxx_pci.c} (79%)
> create mode 100644 include/asm-ppc/fsl_dma.h
> create mode 100644 include/configs/P2020DS.h
Applied to "next" branch, thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
Programmer's Lament: (Shakespeare, Macbeth, Act I, Scene vii)
"That we but teach bloody instructions,
which, being taught, return to plague the inventor..."
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
