Hi Bin,
On 4 December 2014 at 08:03, Bin Meng <bmeng...@gmail.com> wrote:
> Signed-off-by: Bin Meng <bmeng...@gmail.com>
> ---
> configs/crownbay_defconfig | 6 ++++++
> include/configs/crownbay.h | 52
> ++++++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 58 insertions(+)
> create mode 100644 configs/crownbay_defconfig
> create mode 100644 include/configs/crownbay.h
>
> diff --git a/configs/crownbay_defconfig b/configs/crownbay_defconfig
> new file mode 100644
> index 0000000..ce90553
> --- /dev/null
> +++ b/configs/crownbay_defconfig
> @@ -0,0 +1,6 @@
> +CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xfff00000"
> +CONFIG_X86=y
> +CONFIG_TARGET_CROWNBAY=y
> +CONFIG_OF_CONTROL=y
> +CONFIG_OF_SEPARATE=y
> +CONFIG_DEFAULT_DEVICE_TREE="crownbay"
> diff --git a/include/configs/crownbay.h b/include/configs/crownbay.h
> new file mode 100644
> index 0000000..2314e62
> --- /dev/null
> +++ b/include/configs/crownbay.h
> @@ -0,0 +1,52 @@
> +/*
> + * Copyright (C) 2014, Bin Meng <bmeng...@gmail.com>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +/*
> + * board/config.h - configuration options, board specific
> + */
> +
> +#ifndef __CONFIG_H
> +#define __CONFIG_H
> +
> +#include <configs/x86-common.h>
> +
> +#define CONFIG_SYS_MONITOR_LEN (1 << 20)
> +#define CONFIG_SYS_X86_START16 0xfffff800
> +#define CONFIG_BOARD_EARLY_INIT_F
> +
> +#define CONFIG_X86_RESET_VECTOR
> +#define CONFIG_NR_DRAM_BANKS 1
> +
> +#define CONFIG_COREBOOT_SERIAL
Do you think you could create a patch to rename this to x86_serial?
> +#define CONFIG_SMSC_LPC47M
> +
> +#define CONFIG_PCI_MEM_BUS 0x40000000
> +#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
> +#define CONFIG_PCI_MEM_SIZE 0x80000000
> +
> +#define CONFIG_PCI_PREF_BUS 0xc0000000
> +#define CONFIG_PCI_PREF_PHYS CONFIG_PCI_PREF_BUS
> +#define CONFIG_PCI_PREF_SIZE 0x20000000
> +
> +#define CONFIG_PCI_IO_BUS 0x2000
> +#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
> +#define CONFIG_PCI_IO_SIZE 0xe000
> +
> +#define CONFIG_SYS_EARLY_PCI_INIT
> +#define CONFIG_PCI_PNP
> +
> +#define CONFIG_STD_DEVICES_SETTINGS "stdin=serial\0" \
> + "stdout=serial\0" \
> + "stderr=serial\0"
> +
> +#define CONFIG_SCSI_DEV_LIST \
> + {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TCF_SATA}
> +
> +/* Video is not supported */
> +#undef CONFIG_VIDEO
> +#undef CONFIG_CFB_CONSOLE
Why is video not supported?
> +
> +#endif /* __CONFIG_H */
> --
> 1.8.2.1
>
Regards,
Simon
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
