When enabling NAND support for a board, one must also define
CONFIG_SYS_64BIT_VSPRINTF because this is needed in nand_util.c
for correct output.
Signed-off-by: Wolfgang Denk <w...@denx.de>
Cc: Stefan Roese <s...@denx.de>
Cc: Reinhard Arlt <reinhard.a...@esd-electronics.com>
---
v2: reposted in context with remaining patches of this series;
changed to use common spelling for CPU/board names.
include/configs/mecp5123.h | 2 ++
include/configs/mpc5121ads.h | 2 ++
2 files changed, 4 insertions(+), 0 deletions(-)
diff --git a/include/configs/mecp5123.h b/include/configs/mecp5123.h
index 0831843..ed3e70f 100644
--- a/include/configs/mecp5123.h
+++ b/include/configs/mecp5123.h
@@ -187,6 +187,8 @@
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define NAND_MAX_CHIPS CONFIG_SYS_MAX_NAND_DEVICE
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
+
/*
* Configuration parameters for MPC5121 NAND driver
*/
diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h
index 45a004e..852d7b1 100644
--- a/include/configs/mpc5121ads.h
+++ b/include/configs/mpc5121ads.h
@@ -211,6 +211,8 @@
#define NAND_MAX_CHIPS CONFIG_SYS_MAX_NAND_DEVICE
#define CONFIG_SYS_NAND_SELECT_DEVICE /* driver supports mutipl. chips */
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
+
/*
* Configuration parameters for MPC5121 NAND driver
*/
--
1.6.0.6
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
