On 24/11/2014 15:24, Fabio Estevam wrote:
> Printing the calibration data on every boot does not provide really useful
> information:
>
> U-Boot 2015.01-rc1-18266-ge7eb277 (Nov 24 2014 - 11:29:51)
>
>
>
> CPU: Freescale i.MX6Q rev1.2 at 792 MHz
>
> CPU: Thermal calibration data: 0x5d85067d
>
> CPU: Temperature 33 C
>
> Reset cause: POR
>
> Board: MX6-SabreSD
>
> Do not display the calibration data in order to have a cleaner boot log.
>
>
> Signed-off-by: Fabio Estevam <fabio.este...@freescale.com>
> ---
> drivers/thermal/imx_thermal.c | 2 --
> 1 file changed, 2 deletions(-)
>
> diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
> index 1161585..0bd9cfd 100644
> --- a/drivers/thermal/imx_thermal.c
> +++ b/drivers/thermal/imx_thermal.c
> @@ -156,8 +156,6 @@ static int imx_thermal_probe(struct udevice *dev)
> if (fuse == 0 || fuse == ~0) {
> printf("CPU: Thermal invalid data, fuse: 0x%x\n", fuse);
> return -EPERM;
> - } else {
> - printf("CPU: Thermal calibration data: 0x%x\n", fuse);
> }
>
> *priv = fuse;
>
Applied to u-boot-imx, thanks !
Best regards,
Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de
=====================================================================
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
