On 21/11/2014 11:47, Nikita Kiryanov wrote: > This series adds the sata stop command, which includes both cmd_sata code and > driver support for resetting sata. > A non-dummy reset_sata() is provided for dwc_ahsata, and a non-default > sata_stop() is provided for cm_fx6. > Finally, we use the new functionality to turn off sata on boot for mx6 > devices. > > Cc: Stefano Babic <sba...@denx.de> > Cc: Simon Glass <s...@chromium.org> > > Nikita Kiryanov (5): > arm: mx6: introduce disable_sata_clock > sata: implement reset_sata for dwc_ahsata > cmd_sata: implement sata stop command > arm: mx6: cm_fx6: implement board specific sata stop > arm: imx: stop sata on boot > > arch/arm/cpu/armv7/mx6/clock.c | 8 ++++++++ > arch/arm/cpu/armv7/omap-common/sata.c | 5 +++++ > arch/arm/imx-common/cpu.c | 8 ++++++-- > arch/arm/include/asm/arch-mx6/clock.h | 1 + > board/compulab/cm_fx6/cm_fx6.c | 12 +++++++++--- > common/cmd_sata.c | 24 +++++++++++++++++++++++- > drivers/block/ata_piix.c | 5 +++++ > drivers/block/dwc_ahsata.c | 21 +++++++++++++++++++++ > drivers/block/fsl_sata.c | 5 +++++ > drivers/block/pata_bfin.c | 5 +++++ > drivers/block/sata_dwc.c | 5 +++++ > drivers/block/sata_sil.c | 5 +++++ > drivers/block/sata_sil3114.c | 5 +++++ > include/sata.h | 3 +++ > 14 files changed, 106 insertions(+), 6 deletions(-) >
Applied to u-boot-imx, thanks ! Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
