Hi, Markus.
It's reasonable, looks good to me.
Acked-by: Jaehoon Chung <jh80.ch...@samsung.com>
Best Regards,
Jaehoon Chung
On 11/21/2014 07:50 PM, Jaehoon Chung wrote:
> Hi, Markus.
>
> On 11/18/2014 11:11 PM, Markus Niebel wrote:
>> From: Markus Niebel <markus.nie...@tq-group.com>
>>
>> if the card claims to be high capacity and the card
>> is partitioned the capacity shall still be read from
>> ext_csd SEC_COUNT even if the resulting capacity is
>> smaller than 2 GiB
>
> I have one question.
> "smaller than 2GiB" means the size after completed partition?
>
> Best Regards,
> Jaehoon Chung
>
>>
>> Signed-off-by: Markus Niebel <markus.nie...@tq-group.com>
>> ---
>> drivers/mmc/mmc.c | 15 +++++++++++++++
>> include/mmc.h | 3 +++
>> 2 files changed, 18 insertions(+)
>>
>> diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
>> index 44a4feb..24b0989 100644
>> --- a/drivers/mmc/mmc.c
>> +++ b/drivers/mmc/mmc.c
>> @@ -1022,6 +1022,21 @@ static int mmc_startup(struct mmc *mmc)
>> mmc->erase_grp_size =
>> ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE] *
>> MMC_MAX_BLOCK_LEN * 1024;
>> + /*
>> + * if high capacity and partition setting completed
>> + * SEC_COUNT is valid even if it is smaller than 2 GiB
>> + * JEDEC Standard JESD84-B45, 6.2.4
>> + */
>> + if (mmc->high_capacity &&
>> + (ext_csd[EXT_CSD_PARTITION_SETTING] &
>> + EXT_CSD_PARTITION_SETTING_COMPLETED)) {
>> + capacity = (ext_csd[EXT_CSD_SEC_CNT]) |
>> + (ext_csd[EXT_CSD_SEC_CNT + 1] << 8) |
>> + (ext_csd[EXT_CSD_SEC_CNT + 2] << 16) |
>> + (ext_csd[EXT_CSD_SEC_CNT + 3] << 24);
>> + capacity *= MMC_MAX_BLOCK_LEN;
>> + mmc->capacity_user = capacity;
>> + }
>> } else {
>> /* Calculate the group size from the csd value. */
>> int erase_gsz, erase_gmul;
>> diff --git a/include/mmc.h b/include/mmc.h
>> index d74a190..cb91565 100644
>> --- a/include/mmc.h
>> +++ b/include/mmc.h
>> @@ -147,6 +147,7 @@
>> * EXT_CSD fields
>> */
>> #define EXT_CSD_GP_SIZE_MULT 143 /* R/W */
>> +#define EXT_CSD_PARTITION_SETTING 155 /* R/W */
>> #define EXT_CSD_PARTITIONS_ATTRIBUTE 156 /* R/W */
>> #define EXT_CSD_PARTITIONING_SUPPORT 160 /* RO */
>> #define EXT_CSD_RST_N_FUNCTION 162 /* R/W */
>> @@ -197,6 +198,8 @@
>> #define EXT_CSD_BOOT_BUS_WIDTH_RESET(x) (x << 2)
>> #define EXT_CSD_BOOT_BUS_WIDTH_WIDTH(x) (x)
>>
>> +#define EXT_CSD_PARTITION_SETTING_COMPLETED (1 << 0)
>> +
>> #define R1_ILLEGAL_COMMAND (1 << 22)
>> #define R1_APP_CMD (1 << 5)
>>
>>
>
> _______________________________________________
> U-Boot mailing list
> U-Boot@lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
