On 06/11/14 19:44, Sjoerd Simons wrote: > The current vbus GPIOs on snow make very little sense, their number is > far above the maximum. As a result, USB doesn't work on snow. > > Correct the GPIO numbering so they match the current scheme for exynos5. > Tested both EHCI and XHCI to correctly work after this change. > > Signed-off-by: Sjoerd Simons <[email protected]> > --- > arch/arm/dts/exynos5250-snow.dts | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/dts/exynos5250-snow.dts > b/arch/arm/dts/exynos5250-snow.dts > index 6fd9275..95af025 100644 > --- a/arch/arm/dts/exynos5250-snow.dts > +++ b/arch/arm/dts/exynos5250-snow.dts > @@ -131,11 +131,11 @@ > }; > > ehci@12110000 { > - samsung,vbus-gpio = <&gpio 0x309 0>; /* X11 */ > + samsung,vbus-gpio = <&gpio 0xb1 0>; /* X11 */ > }; > > xhci@12000000 { > - samsung,vbus-gpio = <&gpio 0x317 0>; /* X27 */ > + samsung,vbus-gpio = <&gpio 0xbf 0>; /* X27 */ > }; > > tmu@10060000 { >
applied to u-boot-samsung. Thanks, Minkyu Kang. _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
