Dear Bo Shen, Bo Shen <voice.s...@atmel.com> writes: >The code for this board supports following features: > - Boot media support: NAND flash/SD card/SPI flash > - Support LCD display (optional, disabled by default) > - Support ethernet > - Support USB mass storage > >Signed-off-by: Bo Shen <voice.s...@atmel.com> >--- >This patch based on the patch to add sama5d4ek board support. > >Changes in v2: > - Select CPU_V7 in Kconfig > > arch/arm/Kconfig | 5 + > board/atmel/sama5d4_xplained/Kconfig | 18 ++ > board/atmel/sama5d4_xplained/MAINTAINERS | 8 + > board/atmel/sama5d4_xplained/Makefile | 8 + > board/atmel/sama5d4_xplained/sama5d4_xplained.c | 319 ++++++++++++++++++++++++ > configs/sama5d4_xplained_mmc_defconfig | 3 + > configs/sama5d4_xplained_nandflash_defconfig | 3 + > configs/sama5d4_xplained_spiflash_defconfig | 3 + > include/configs/sama5d4_xplained.h | 216 ++++++++++++++++ > 9 files changed, 583 insertions(+) > create mode 100644 board/atmel/sama5d4_xplained/Kconfig > create mode 100644 board/atmel/sama5d4_xplained/MAINTAINERS > create mode 100644 board/atmel/sama5d4_xplained/Makefile > create mode 100644 board/atmel/sama5d4_xplained/sama5d4_xplained.c > create mode 100644 configs/sama5d4_xplained_mmc_defconfig > create mode 100644 configs/sama5d4_xplained_nandflash_defconfig > create mode 100644 configs/sama5d4_xplained_spiflash_defconfig > create mode 100644 include/configs/sama5d4_xplained.h
applied to u-boot-atmel/master, thanks! Best regards, Andreas Bießmann _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
