From: Fabio Estevam <fabio.este...@freescale.com>
Make clear that current SPL code only supports the mx6q variant.
Signed-off-by: Fabio Estevam <fabio.este...@freescale.com>
---
board/freescale/mx6sabresd/mx6sabresd.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/board/freescale/mx6sabresd/mx6sabresd.c
b/board/freescale/mx6sabresd/mx6sabresd.c
index 343c3b6..d5cd37d 100644
--- a/board/freescale/mx6sabresd/mx6sabresd.c
+++ b/board/freescale/mx6sabresd/mx6sabresd.c
@@ -754,10 +754,8 @@ static void gpr_init(void)
}
/*
- * This section require the differentiation
- * between iMX6 Sabre Families.
- * But for now, it will configure only for
- * SabreSD.
+ * This section requires the differentiation between iMX6 Sabre boards, but
+ * for now, it will configure only for the mx6q variant.
*/
static void spl_dram_init(void)
{
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
