Hi Fabio, On 11/13/2014 11:58 PM, Fabio Estevam wrote:
From: Fabio Estevam <fabio.este...@freescale.com>mx6sabresd_spl.cfg configures CCM registers, GPR registers and CCM_CCOSR. Move the configuration to the spl code.
I forgot to asker earlier, but what are the benefits of going from DCD to SPL code to provide HW initialization?
Regards, Nikolay _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
