Now we are adding a new Peach-Pi board which is a variant of Peach-Pit and is based on Exynos5800. Exynos5800 itself is a variant of Exynos5420, hence, most of the hardware config and settings are reused for this board.
Changes since v1: - Rebased all the patches Changes since v2: - Rebased all the patches - Added new patch "Enable update mode for DREX controller" Changes since v3: - Rebased all the patches - Added "Tested-by" and "Acked-by" - In patch 3/7 fixed warning "line over 80 characters" Akshay Saraswat (5): Exynos5800: Introduce new proid for Exynos5800 Exynos5800: Add DTS for new board Peach-Pi Config: Exynos5800: Enable build for Peach-Pi Config: Exynos5420: Refactor SDRAM Bank and Size Exynos5: ddr3: Choose between single or double channel config Alim Akhtar (1): DMC: Exynos5: Enable update mode for DREX controller Vadim Bendebury (1): Peach-Pi: Use the enhanced usb_copy() prototype arch/arm/cpu/armv7/exynos/Kconfig | 7 +- arch/arm/cpu/armv7/exynos/clock.c | 19 +-- arch/arm/cpu/armv7/exynos/clock_init_exynos5.c | 2 +- arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c | 29 +++++ arch/arm/cpu/armv7/exynos/pinmux.c | 2 +- arch/arm/cpu/armv7/exynos/spl_boot.c | 10 +- arch/arm/dts/Makefile | 3 +- arch/arm/dts/exynos5800-peach-pi.dts | 157 +++++++++++++++++++++++++ arch/arm/include/asm/arch-exynos/cpu.h | 10 +- arch/arm/include/asm/arch-exynos/dmc.h | 1 + arch/arm/include/asm/arch-exynos/gpio.h | 4 +- board/samsung/smdk5420/Kconfig | 16 +++ board/samsung/smdk5420/MAINTAINERS | 2 + configs/peach-pi_defconfig | 5 + include/configs/exynos5420-common.h | 9 +- include/configs/peach-pi.h | 50 ++++++++ include/configs/peach-pit.h | 8 +- include/configs/smdk5420.h | 4 + 18 files changed, 313 insertions(+), 25 deletions(-) create mode 100644 arch/arm/dts/exynos5800-peach-pi.dts create mode 100644 configs/peach-pi_defconfig create mode 100644 include/configs/peach-pi.h -- 1.9.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot