Hi, On 29 October 2014 13:08, Simon Glass <s...@chromium.org> wrote: > This series adds driver model support for serial and GPIO for the Atmel AT91 > series. The at91sam9260-based Snapper 9260 is converted over as an example. > > For both drivers the old behaviour is retained, so driver model becomes > optional, not mandatory. > > This series is available at u-boot-dm/atmel-working.
Are there any comments on this version please? Otherwise I would like to pull it into u-boot-dm and start sorting out the Kconfig things (i.e. get rid of the CONFIG options for the 7-8 boards I have touched). > > Changes in v2: > - Use a text base of 0x21f00000 > - Remove unnecessary port number check > - Use GPIO_PER_BANK instead of 32 in more places > - Use PA/PB/PC instead of A/B/C for GPIO port names > - Rename header to atmel_serial.h and use atmel instead of at91 throughout > - Update platform data and header #include for the new driver name > - Add new patch to add myself as maintainer for snapper9260 > - Add a patch to implement baud rate changes > > Simon Glass (9): > dm: at91: Correct text base for snapper9260 > dm: at91: Move snapper9260 to generic baord > dm: at91: Add driver model support for atmel GPIO driver > dm: at91: Add platform data for GPIO on at91sam9260-based boards > dm: at91: Refactor serial driver slightly for driver model > dm: at91: Add driver model support for the serial driver > dm: at91: Convert snapper9260 to use driver model > dm: at91: Add myself as maintainer for snapper9260 > dm: serial: Support changing the baud rate > > arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c | 14 ++ > arch/arm/include/asm/arch-at91/at91sam9260.h | 4 +- > arch/arm/include/asm/arch-at91/atmel_serial.h | 15 ++ > arch/arm/include/asm/arch-at91/gpio.h | 6 + > board/bluewater/snapper9260/MAINTAINERS | 2 +- > board/bluewater/snapper9260/snapper9260.c | 18 +- > drivers/gpio/at91_gpio.c | 241 > +++++++++++++++++----- > drivers/serial/atmel_usart.c | 116 ++++++++++- > drivers/serial/serial-uclass.c | 67 ++++++ > include/configs/snapper9260.h | 12 +- > 10 files changed, 426 insertions(+), 69 deletions(-) > create mode 100644 arch/arm/include/asm/arch-at91/atmel_serial.h > > -- > 2.1.0.rc2.206.gedb03e5 > Regards, Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
