Hello Tom,
Tom Rix wrote:
> The power reset button is on the top right side of the main board.
> Press and hold for about to 8 seconds to completely reset the board.
>
> Some of the beta boards have a hardware problem that prevents
> using this feature. If is difficult to further characterize the
> boards that fail. So disable resetting for all beta boards.
>
> Signed-off-by: Tom Rix <tom....@windriver.com>
> ---
> board/omap3/zoom2/zoom2.c | 13 +++++++++++++
> drivers/i2c/twl4030_i2c.c | 22 ++++++++++++++++++++++
> include/configs/omap3_zoom2.h | 1 +
> include/twl4030.h | 10 ++++++++++
> 4 files changed, 46 insertions(+), 0 deletions(-)
>
> diff --git a/board/omap3/zoom2/zoom2.c b/board/omap3/zoom2/zoom2.c
> index 08fdafb..d5da920 100644
> --- a/board/omap3/zoom2/zoom2.c
> +++ b/board/omap3/zoom2/zoom2.c
[...]
> diff --git a/drivers/i2c/twl4030_i2c.c b/drivers/i2c/twl4030_i2c.c
> index 774f813..549f974 100644
> --- a/drivers/i2c/twl4030_i2c.c
> +++ b/drivers/i2c/twl4030_i2c.c
> @@ -35,3 +35,25 @@ static inline int twl4030_i2c_read_u8(u8 chip_no, u8 *val,
> u8 reg)
> return i2c_read(chip_no, reg, 1, val, 1);
> }
>
> +/*
> + * Power Reset
> + */
> +void twl4030_power_reset_init(void)
> +{
What has this to do with an i2c driver? No, I don;t want to see such
a function in an i2c driver. I tend to put this "driver" in an another
dir, like I said in my previous mail maybe in drivers/misc ...
bye
Heiko
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
