Menon, Nishanth wrote:
>> -----Original Message-----
>> From: Peter Tyser [mailto:pty...@xes-inc.com]
>> Sent: Wednesday, June 10, 2009 9:27 AM
>>> diff --git a/drivers/i2c/twl4030_i2c.c b/drivers/i2c/twl4030_i2c.c
>>> index 774f813..549f974 100644
>>> --- a/drivers/i2c/twl4030_i2c.c
>>> +++ b/drivers/i2c/twl4030_i2c.c
>>> @@ -35,3 +35,25 @@ static inline int twl4030_i2c_read_u8(u8 chip_no, u8
>> *val, u8 reg)
>>>     return i2c_read(chip_no, reg, 1, val, 1);
>>>  }
>>>
>>> +/*
>>> + * Power Reset
>>> + */
>>> +void twl4030_power_reset_init(void)
>>> +{
>>> +#ifdef CONFIG_OMAP3_ZOOM2
>>> +   u8 val = 0;
>>> +   if (twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER, &val,
>>> +                           TWL4030_PM_MASTER_P1_SW_EVENTS)) {
>>> +           printf("Error:TWL4030: failed to read the power register\n");
>>> +           printf("Could not initialize hardware reset\n");
>>> +   } else {
>>> +           val |= TWL4030_PM_MASTER_SW_EVENTS_STOPON_PWRON;
>>> +           if (twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, val,
>>> +                                    TWL4030_PM_MASTER_P1_SW_EVENTS)) {
>>> +                   printf("Error:TWL4030: failed to write the power
>> register\n");
>>> +                   printf("Could not initialize hardware reset\n");
>>> +           }
>>> +   }
>>> +#endif
>>> +}
>>> +
>> All other drivers in drivers/i2c are host adapter drivers.  Ie they
>> implement i2c_read(), i2c_write(), i2c_probe(), and i2c_init().  The
>> twl4030_i2c.c driver doesn't seem to fit this mold.  Perhaps it would be
>> better placed in drivers/misc or a new drivers/power directory similar
>> to Linux?
> 
> This function probably belongs to board/omap3/common/power.c -> or even 
> better to the board file itself?

I was about to mention the opposite ;)

Jean-Christophe asked to move the code from power.c to driver directory

http://lists.denx.de/pipermail/u-boot/2009-May/052400.html

If you follow above discussion, I was fine with power.c. If we get now 
a twl4030_i2c.c, we should merge the code from power.c into it, too 
(where ever it will be located and named, then).

Best regards

Dirk
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to