That's exactly that I am going to ask you. Because, some people in the community doesn't need the SPL.
I think this will need a separate config files (e.g mx6slevk_spl_defconfig, mx6qsabresd_spl_defconfig) Regards, john On Sun, Nov 9, 2014 at 4:03 PM, Fabio Estevam <feste...@gmail.com> wrote: > On Sat, Nov 8, 2014 at 4:22 PM, John Tobias <john.tobias...@gmail.com> wrote: >> add the spl on build configuration of iMX6 SabreSD >> --- >> include/configs/mx6sabresd.h | 7 +++++++ >> 1 file changed, 7 insertions(+) >> >> diff --git a/include/configs/mx6sabresd.h b/include/configs/mx6sabresd.h >> index 938030d..4d2e54a 100644 >> --- a/include/configs/mx6sabresd.h >> +++ b/include/configs/mx6sabresd.h >> @@ -12,6 +12,13 @@ >> #include <asm/arch/imx-regs.h> >> #include <asm/imx-common/gpio.h> >> >> +#ifdef CONFIG_SPL >> +#define CONFIG_SPL_LIBCOMMON_SUPPORT >> +#define CONFIG_SPL_MMC_SUPPORT >> +#define CONFIG_SPL_STACK 0x0093FFB8 >> +#include "imx6_spl.h" >> +#endif > > I am wondering if it would be better to create a separate target for > the spl version, so that the people could still use the standard DCD > approach as they are used to. > > Regards, > > Fabio Estevam _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
