Dear Andy,
In message <1244091241-22766-1-git-send-email-aflem...@freescale.com> you wrote:
> are available in the git repository at:
>
> git://www.denx.de/git/u-boot-mpc85xx.git master
>
> Dave Liu (3):
> 85xx: Fix the clock adjust of mpc8569mds board
> 85xx: Fix the wrong BCSR address of 8569MDS
> 85xx: Fix the wrong SYS_CLK_IN for 8569MDS
>
> Fredrik Arnerup (1):
> 85xx: bugfix for reading maximum TLB size on mpc85xx
>
> Srikanth Srinivasan (1):
> 85xx: Add P2020DS support
>
> MAKEALL | 2 +
> Makefile | 9 +
> board/freescale/mpc8569mds/bcsr.c | 2 +-
> board/freescale/mpc8569mds/ddr.c | 2 +-
> board/freescale/p2020ds/Makefile | 54 +++
> board/freescale/p2020ds/config.mk | 32 ++
> board/freescale/p2020ds/ddr.c | 130 +++++++
> board/freescale/p2020ds/law.c | 42 ++
> board/freescale/p2020ds/p2020ds.c | 634 ++++++++++++++++++++++++++++++
> board/freescale/p2020ds/tlb.c | 95 +++++
> board/freescale/p2020ds/u-boot.lds | 143 +++++++
> cpu/mpc85xx/tlb.c | 2 +-
> include/configs/MPC8569MDS.h | 4 +-
> include/configs/P2020DS.h | 741
> ++++++++++++++++++++++++++++++++++++
> 14 files changed, 1887 insertions(+), 5 deletions(-)
> create mode 100644 board/freescale/p2020ds/Makefile
> create mode 100644 board/freescale/p2020ds/config.mk
> create mode 100644 board/freescale/p2020ds/ddr.c
> create mode 100644 board/freescale/p2020ds/law.c
> create mode 100644 board/freescale/p2020ds/p2020ds.c
> create mode 100644 board/freescale/p2020ds/tlb.c
> create mode 100644 board/freescale/p2020ds/u-boot.lds
> create mode 100644 include/configs/P2020DS.h
Seems you got stuck in work. To make some progress, I went ahead and
cherry-picked the commits that were ok, i. e. everything above except
the new stuff ("85xx: Add P2020DS support").
I will also apply some other 8xxx related patches directly, if they
seem either clear fixes or otherwise obvious to me. Hope this is OK
with you.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
I will also, for an appropriate fee, certify that your keyboard is
object-oriented, and that the bits on your hard disk are template-
compatible. - Jeffrey S. Haemer in <411akr$...@cygnus.com>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
