Hi Wolfgang, On Monday 08 June 2009 21:46:08 Wolfgang Denk wrote: > > Did you actually see the code? Did you see the board specific code added > > to the "common" NFC driver code? This is not really something I like to > > see in common drivers. And such code usually get's a NAK from you as > > well. > > No, I didn't check that code. > > Hm... but then we need a clean way to implement this - in U-Boot and > Linux.
ACK. But please note that the scope of my current project is not support NAND on MPC5121ADS, but on esd MECP5123. MPC5121ADS support can be added in a clean way later on. > > As stated above this ADS addition is not a "clean" one. So there is > > effort necessary to make it acceptable. And as I also stated the driver > > works without this code just fine and the ADS. At least my tests didn't > > show any problems. > > What exactly did you test? Did your tests include (for example) > reading and writing to a file system on NAND? I used "nand read/write" for testing. Best regards, Stefan ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: off...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
