Hi Wolfgang, On Monday 08 June 2009 20:14:33 Wolfgang Denk wrote: > Dear Stefan, > > In message <200906081937.02354...@denx.de> you wrote: > > > > + out_be32(&im->mddrc.lut_table4_alternate_upper, > > > > CONFIG_SYS_MDDRCGRP_LUT4_AU); > > > > + out_be32(&im->mddrc.lut_table4_alternate_lower, > > > > CONFIG_SYS_MDDRCGRP_LUT4_AL); > > > > > > Lines too long. > > > > OK. Some is true for aria and mcp5121ads btw. But I'll change it in the > > next patch version. > > If you argument that the too long lines are easier to read then the > wrapped ones, I will not fight about this :-)
Yes, sometimes I really prefer these "too long lines" because it's just better readable. I'll keep this code part as is then. :) > > > How long does it to boot with such an environment in EEPROM? > > > > Quite long. About 10 seconds to the U-Boot prompt. > > He. And then try "setenv baudrate 115200 ; saveenv" and measure again. About 6 seconds. > Does your customer really want to release such a product to his > customers? Other boards boot in a fraction of that time. I know. I asked again. Please accept the EEPROM decision for now. Best regards, Stefan ===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: off...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
