On Tuesday, November 04, 2014 at 08:49:59 AM, Peng Fan wrote: So uh, what exactly does this patchset do ? It's not clear at all from the subject and any description is completely missing.
To my knowledge, i.MX6 already does have USB support in U-Boot, so the subject is misleading as well. > Changes v2: > - move pinmux setting into board_init > - add otg polarity setting in board_ehci_hcd_init > - Introduce a new weak function to give board a choice to decide the work > mode of the otg port, since a otg port can also work in host mode without > touch ID pin. > > Peng Fan (3): > usb:ehci-mx6 add board_ehci_usb_mode function > imx:mx6sxsabresd add usb support > imx:mx6slevk add usb support > > arch/arm/include/asm/arch-mx6/mx6sl_pins.h | 5 +++ > board/freescale/mx6slevk/mx6slevk.c | 51 > +++++++++++++++++++++++++++++ board/freescale/mx6sxsabresd/mx6sxsabresd.c > | 51 +++++++++++++++++++++++++++++ drivers/usb/host/ehci-mx6.c > | 7 ++++ > include/configs/mx6slevk.h | 14 ++++++++ > include/configs/mx6sxsabresd.h | 14 ++++++++ > 6 files changed, 142 insertions(+) Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
