When you sent the patch vX, add the changelog. I don't know what changed at your patch V2.
Best Regards, Jaehoon Chung On 10/31/2014 09:14 PM, Hyungwon Hwang wrote: > This patchset adds support for Exynos5422 odroid xu3 board. > I have done this work on the patchset submitted by Akshay Saraswat. > > https://patchwork.ozlabs.org/patch/400043/ > > Hyungwon Hwang (4): > exynos5: fix GPIO information of exynos5420 > Exynos5800: Add support for Exynos5800 > odroid: make some macros common > Odroid-XU3: Add support for Odroid-XU3 > > arch/arm/cpu/armv7/exynos/Kconfig | 4 + > arch/arm/dts/Makefile | 3 +- > arch/arm/dts/exynos5422-odroidxu3.dts | 72 +++++++++ > arch/arm/include/asm/arch-exynos/cpu.h | 11 +- > arch/arm/include/asm/arch-exynos/gpio.h | 261 > +++++++++++++++++--------------- > board/samsung/odroid-xu3/Kconfig | 12 ++ > board/samsung/odroid-xu3/MAINTAINERS | 6 + > board/samsung/odroid-xu3/Makefile | 7 + > board/samsung/odroid-xu3/odroid-xu3.c | 132 ++++++++++++++++ > board/samsung/odroid-xu3/setup.h | 115 ++++++++++++++ > board/samsung/odroid/odroid.c | 1 + > board/samsung/odroid/setup.h | 8 - > configs/odroid-xu3_defconfig | 4 + > drivers/gpio/s5p_gpio.c | 4 +- > include/configs/odroid_xu3.h | 73 +++++++++ > 15 files changed, 576 insertions(+), 137 deletions(-) > create mode 100644 arch/arm/dts/exynos5422-odroidxu3.dts > create mode 100644 board/samsung/odroid-xu3/Kconfig > create mode 100644 board/samsung/odroid-xu3/MAINTAINERS > create mode 100644 board/samsung/odroid-xu3/Makefile > create mode 100644 board/samsung/odroid-xu3/odroid-xu3.c > create mode 100644 board/samsung/odroid-xu3/setup.h > create mode 100644 configs/odroid-xu3_defconfig > create mode 100644 include/configs/odroid_xu3.h > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
