Hello, Any pointers?
Thanks & Regards, Sanchayan Maity. On Thursday 30 October 2014 11:14 AM, Sanchayan Maity wrote: > Hello, > > I am currently implementing USB Host and client support for Freescale Vybrid > platform in u-boot. I managed to get the host implementation working. > > For the host side, usb start calls usb_init(), which in turns call, > usb_lowlevel_init(), from there into the ehic_hcd_init() of my > implementation. So, setting up the necessary clocks and plls for USB in my > implementation and then setting up the usb_ehci, ehci_hccr and echi_hcor > structures was all. The flow and setup required i was able to trace. > > The USB client part is not clear to me. I was thinking i can use the ci_udc > driver somehow to implement the client part. How can i use the ci_udc driver > to implement client functionality?. From what i could see, the > usb_gadget_driver_register() is suppose to be the first call. But, i couldn't > trace from where this gets called or the flow and setup is suppose to be. OR > Is a separate client driver required and nothing generic can be used akin to > how it could be done for host? > > Sorry if i am asking this question in the wrong place. I couldn't find anyone > in the u-boot IRC channel nor find something similar to the kernel-newbies > mailing list. > > Hope i am asking the right questions. > > Thanks & Regards, > Sanchayan Maity. > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
