On Fri, Oct 31, 2014 at 1:08 AM, Peng Fan <peng....@freescale.com> wrote: > The PFUZ probe failed with the following msg: > " wait_for_sr_state: failed sr=81 cr=a0 state=2020 > i2c_init_transfer: failed for chip 0x8 retry=0 > wait_for_sr_state: failed sr=81 cr=a0 state=2020 > i2c_init_transfer: failed for chip 0x8 retry=1 > wait_for_sr_state: failed sr=81 cr=a0 state=2020 > i2c_init_transfer: failed for chip 0x8 retry=2 > i2c_init_transfer: give up i2c_regs=021a0000 > Can't find PMIC:PFUZE100 " > > board_early_init_f is too early to call i2c related setting, because > init_func_i2c is called after board_early_init_f being invoked. Thus > move setup_i2c into board_init. > > Also PFUZ is connected to I2C bus 0, so change "1" -> "0". > > Using this patch PFUZ can be correctly probed: > "PMIC: PFUZE100 ID=0x11" > > Signed-off-by: Peng Fan <peng....@freescale.com>
Acked-by: Fabio Estevam <fabio.este...@freescale.com> _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
