[U-Boot] [PATCH 2/2] sunxi: Request USB vbus gpio

[Hans de Goede]

This is necessary for the device-model enabled builds to work properly.

Signed-off-by: Hans de Goede <hdego...@redhat.com>
---
 drivers/usb/host/ehci-sunxi.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/usb/host/ehci-sunxi.c b/drivers/usb/host/ehci-sunxi.c
index d65e798..4befd57 100644
--- a/drivers/usb/host/ehci-sunxi.c
+++ b/drivers/usb/host/ehci-sunxi.c
@@ -163,11 +163,16 @@ int ehci_hcd_init(int index, enum usb_init_type init, 
struct ehci_hccr **hccr,
 {
        struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
        struct sunxi_ehci_hcd *sunxi_ehci = &sunxi_echi_hcd[index];
+       int err;
 
        /* enable common PHY only once */
        if (index == 0)
                setbits_le32(&ccm->usb_clk_cfg, CCM_USB_CTRL_PHYGATE);
 
+       err = gpio_request(sunxi_ehci->gpio_vbus, "ehci_vbus");
+       if (err)
+               return err;
+
        sunxi_ehci_enable(sunxi_ehci);
 
        *hccr = get_io_base(sunxi_ehci->id);
@@ -188,9 +193,14 @@ int ehci_hcd_stop(int index)
 {
        struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
        struct sunxi_ehci_hcd *sunxi_ehci = &sunxi_echi_hcd[index];
+       int err;
 
        sunxi_ehci_disable(sunxi_ehci);
 
+       err = gpio_free(sunxi_ehci->gpio_vbus);
+       if (err)
+               return err;
+
        /* disable common PHY only once, for the last enabled hcd */
        if (enabled_hcd_count == 1)
                clrbits_le32(&ccm->usb_clk_cfg, CCM_USB_CTRL_PHYGATE);
-- 
2.1.0

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot