> Usually, it is a good practice to add a commit message > (and not just the subject). > > It will be highly appreciated if you can provide also an > explanation (in the commit message) of what and why it is done.
Well, to be honest, I thought it was all self explanatory, but maybe a bit more context is required. I didn't notice I wrote twl4030 twice, so I'll probably make a v2, including a description. Thanks! > > --- > > drivers/power/twl4030.c | 6 ++++++ > > include/twl4030.h | 2 ++ > > 2 files changed, 8 insertions(+) > > > > diff --git a/drivers/power/twl4030.c b/drivers/power/twl4030.c > > index 3e50310..e578ae6 100644 > > --- a/drivers/power/twl4030.c > > +++ b/drivers/power/twl4030.c > > @@ -98,4 +98,10 @@ void twl4030_power_mmc_init(void) > > TWL4030_PM_RECEIVER_VMMC1_VSEL_32, > > TWL4030_PM_RECEIVER_VMMC1_DEV_GRP, > > TWL4030_PM_RECEIVER_DEV_GRP_P1); > > + > > + /* Set VMMC2 to 3.15 Volts */ > > + twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VMMC2_DEDICATED, > > + TWL4030_PM_RECEIVER_VMMC2_VSEL_32, > > + TWL4030_PM_RECEIVER_VMMC2_DEV_GRP, > > + TWL4030_PM_RECEIVER_DEV_GRP_P1); > > } > > diff --git a/include/twl4030.h b/include/twl4030.h > > index 093c61d..18795a6 100644 > > --- a/include/twl4030.h > > +++ b/include/twl4030.h > > @@ -395,6 +395,8 @@ > > #define TWL4030_PM_RECEIVER_VDAC_VSEL_18 0x03 > > #define TWL4030_PM_RECEIVER_VMMC1_VSEL_30 0x02 > > #define TWL4030_PM_RECEIVER_VMMC1_VSEL_32 0x03 > > +#define TWL4030_PM_RECEIVER_VMMC2_VSEL_30 0x0B > > +#define TWL4030_PM_RECEIVER_VMMC2_VSEL_32 0x0C > > #define TWL4030_PM_RECEIVER_VSIM_VSEL_18 0x03 > > > > /* Device Selection in PM Receiver Module */ > > -- Paul Kocialkowski, Replicant developer Replicant is a fully free Android distribution Website: http://www.replicant.us/ Wiki/Tracker: http://redmine.replicant.us/
signature.asc
Description: This is a digitally signed message part
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
