On Saturday, October 25, 2014 at 01:16:00 PM, Pavel Machek wrote: > On Fri 2014-10-24 23:34:25, Marek Vasut wrote: > > Add example configuration stub for the DWC2 USB controller. > > > > Signed-off-by: Marek Vasut <ma...@denx.de> > > Cc: Chin Liang See <cl...@altera.com> > > Cc: Dinh Nguyen <dingu...@opensource.altera.com> > > Cc: Vince Bridgers <vbrid...@altera.com> > > Cc: Pavel Machek <pa...@denx.de> > > --- > > > > include/configs/socfpga_common.h | 15 +++++++++++++++ > > 1 file changed, 15 insertions(+) > > > > diff --git a/include/configs/socfpga_common.h > > b/include/configs/socfpga_common.h index 9de3aa7..1df886b 100644 > > --- a/include/configs/socfpga_common.h > > +++ b/include/configs/socfpga_common.h > > @@ -176,6 +176,21 @@ > > > > #define CONFIG_BAUDRATE 115200 > > > > /* > > > > + * USB > > + */ > > +#ifdef CONFIG_CMD_USB > > +#define CONFIG_USB_DWC2 > > +#define CONFIG_USB_STORAGE > > +/* > > + * NOTE: User must define either of the following to select which > > + * of the two USB controllers available on SoCFPGA to use. > > + * The DWC2 driver doesn't support multiple USB controllers. > > + * #define CONFIG_USB_DWC2_REG_ADDR SOCFPGA_USB0_ADDRESS > > + * #define CONFIG_USB_DWC2_REG_ADDR SOCFPGA_USB1_ADDRESS > > + */ > > +#endif > > + > > +/* > > Actually, I believe you should uncomment whatever configuration works > for you. That way, users can see what you are actually using/testing.
This is common config code, the user is supposed to define his own setup in board config code (ie. socfpga_cyclone5.h) . A subsequent patch doing just that would be fine. > With that: > > Acked-by: Pavel Machek <pa...@denx.de> > Pavel Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot