On Fri, 3 Oct 2014 15:08:43 -0700 Vagrant Cascadian <vagr...@debian.org> wrote:
> Signed-off-by: Vagrant Cascadian <vagr...@debian.org> > --- > > include/configs/am335x_evm.h | 26 +++++++++++++++++--------- > include/configs/ti_armv7_common.h | 1 + > 2 files changed, 18 insertions(+), 9 deletions(-) > > diff --git a/include/configs/am335x_evm.h > b/include/configs/am335x_evm.h index e2f7ead..b25d990 100644 > --- a/include/configs/am335x_evm.h > +++ b/include/configs/am335x_evm.h > @@ -18,6 +18,21 @@ > > #include <configs/ti_am335x_common.h> > > +#include <config_distro_defaults.h> > + > +#define BOOTENV_BOOT_PARTITIONS "2" On Fedora we use partition 1 everywhere for /boot so this should be "1 2" though partition 2 is swap in out standard images. we really need to read the partition table and find the bootable partition. We are defaulting to telling people to put u-boot and the MLO in raw disk space. > + > +#define BOOTENV_INIT_COMMAND "run findfdt ;" > +#ifdef CONFIG_NAND > +#define BOOTENV_POST_COMMAND "run nandboot ;" > +#endif > + > +#define BOOT_TARGET_DEVICES(func) \ > + func(MMC, mmc, 0) \ > + func(MMC, mmc, 1) > + > +#include <config_distro_bootcmd.h> > + > #ifndef CONFIG_SPL_BUILD > # define CONFIG_FIT > # define CONFIG_TIMESTAMP > @@ -185,17 +200,10 @@ > "if test $fdtfile = undefined; then " \ > "echo WARNING: Could not determine device > tree to use; fi; \0" \ NANDARGS \ > - DFUARGS > + DFUARGS \ > + BOOTENV > #endif > > -#define CONFIG_BOOTCOMMAND \ > - "run findfdt; " \ > - "run mmcboot;" \ > - "setenv mmcdev 1; " \ > - "setenv bootpart 1:2; " \ > - "run mmcboot;" \ > - "run nandboot;" > - > /* NS16550 Configuration */ > #define CONFIG_SYS_NS16550_COM1 0x44e09000 /* > Base EVM has UART0 */ #define CONFIG_SYS_NS16550_COM2 > 0x48022000 /* UART1 */ diff --git > a/include/configs/ti_armv7_common.h > b/include/configs/ti_armv7_common.h index 85171db..f405fea 100644 --- > a/include/configs/ti_armv7_common.h +++ > b/include/configs/ti_armv7_common.h @@ -54,6 +54,7 @@ > #define DEFAULT_LINUX_BOOT_ENV \ > "loadaddr=0x82000000\0" \ > "kernel_addr_r=0x82000000\0" \ > + "scriptaddr=0x82000000\0" \ > "fdtaddr=0x88000000\0" \ > "fdt_addr_r=0x88000000\0" \ > "rdaddr=0x88080000\0" \ _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
