Hi, On 6 October 2014 12:14, Simon Glass <s...@chromium.org> wrote: > This series adds driver model support for serial and GPIO for the Atmel AT91 > series. The at91sam9260-based Snapper 9260 is converted over as an example. > > For both drivers the old behaviour is retained, so driver model becomes > option, not mandatory. > > This series is available at u-boot-dm/atmel-working.
Are there any comments on this series please? > > > Simon Glass (7): > dm: at91: Correct text base for snapper9260 > dm: at91: Move snapper9260 to generic baord > dm: at91: Add driver model support for atmel GPIO driver > dm: at91: Add platform data for GPIO on at91sam9260-based boards > dm: at91: Refactor serial driver slightly for driver model > dm: at91: Add driver model support for the serial driver > dm: at91: Convert snapper9260 to use driver model > > arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c | 14 ++ > arch/arm/include/asm/arch-at91/at91_serial.h | 15 ++ > arch/arm/include/asm/arch-at91/at91sam9260.h | 4 +- > arch/arm/include/asm/arch-at91/gpio.h | 6 + > board/bluewater/snapper9260/snapper9260.c | 18 +- > drivers/gpio/at91_gpio.c | 221 > +++++++++++++++++----- > drivers/serial/atmel_usart.c | 117 +++++++++++- > include/configs/snapper9260.h | 12 +- > 8 files changed, 349 insertions(+), 58 deletions(-) > create mode 100644 arch/arm/include/asm/arch-at91/at91_serial.h > > -- > 2.1.0.rc2.206.gedb03e5 > Regards, Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
