With these options in place it is not possible to change the serial port
using 'make menuconfig' or similar. It seems to result in duplicate
defines.
For example:
In file included from include/linux/kconfig.h:4:0,
from <command-line>:0:
include/generated/autoconf.h:20:0: note: this is the location of the previous
definition
#define CONFIG_CONS_INDEX 2
^
The default option seems to be 1 anyway, in board/ti/am335x/Kconfig.
Remove the options so that we can adjust the serial port if required.
Signed-off-by: Simon Glass <s...@chromium.org>
Acked-by: Tom Rini <tr...@ti.com>
---
Changes in v2: None
configs/am335x_boneblack_defconfig | 2 +-
configs/am335x_boneblack_vboot_defconfig | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/configs/am335x_boneblack_defconfig
b/configs/am335x_boneblack_defconfig
index 38450c0..b631c41 100644
--- a/configs/am335x_boneblack_defconfig
+++ b/configs/am335x_boneblack_defconfig
@@ -1,4 +1,4 @@
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,EMMC_BOOT"
+CONFIG_SYS_EXTRA_OPTIONS="EMMC_BOOT"
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_AM335X_EVM=y
diff --git a/configs/am335x_boneblack_vboot_defconfig
b/configs/am335x_boneblack_vboot_defconfig
index e257143..5837a0a 100644
--- a/configs/am335x_boneblack_vboot_defconfig
+++ b/configs/am335x_boneblack_vboot_defconfig
@@ -1,5 +1,5 @@
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,EMMC_BOOT,ENABLE_VBOOT"
+CONFIG_SYS_EXTRA_OPTIONS="EMMC_BOOT,ENABLE_VBOOT"
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_AM335X_EVM=y
CONFIG_OF_CONTROL=y
--
2.1.0.rc2.206.gedb03e5
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
