(Note: Tegra patches have been applied, I am resending with exynos only) Now that driver model is part of U-Boot, the task of converting drivers over to it begins. GPIO is one of the easiest to convert, since it already has a sandbox driver and a uclass driver.
The Tegra GPIO driver is relatively simple since it has a linear numbering and already uses the generic GPIO framework. Each GPIO bank has a separate device. Some arguments have been made that a single device should support all the GPIO banks, but currently the driver model uclass does not work that way and it would require a second-level data structure to handle the bank feature. This driver has been tested on: - Seaboard (Tegra 20) - Beaver (Tegra 30) - Jetson-TK1 (Tegra 124). I don't have a Tegra 114 board (Dalmore seems to be the only one with U-Boot support) but I am quite confident that it works. For exynos, the pinctrl device tree files are brought in from the kernel and cut down to remove the groupings which we don't yet use. Very small additions are made to avoid replicating the awful tables that Linux has for every exynos SoC. This series sits on top of the exynos refactors. The 'gpio' command is updated to support display of only the allocated GPIOs. This is much more friendly than displaying a large table. A few related clean-ups are provided as well. This series is available at u-boot-dm.git, branch working. Changes in v10: - Adjust ordering of U-Boot .dtsi includes to fix GPIO numbering order - Remove gaps in the GPIO numbering since these are not needed now Changes in v9: - Change compatible string to s5pc110-pinctrl for s5p_goni - Add missing compatible strings from exynos_gpio_ids[] Changes in v8: - Adjust odroid device tree file to use #include instead of /include/ - Add missing special case reg property for exynos5420 GPX0 - Add patch containing pinctrl settings for s5p_goni - Add patch containing pinctrl settings for s5p_goni - Add new patch to move smdkc100 to generic board - Add new patch to move s5p_goni to generic board - Enable driver model for smdkc100 and s5p_goni separately Changes in v7: - Bring in patches from the SPI series to move post-reloc DM init earlier Changes in v6: - Fix typo in compatible string - Remove exynos5420.dtsi which is not used in U-Boot - Move U-Boot changes into their own file - Use exynos54xx everywhere instead of exynos5420 Changes in v5: - Put this patch before the others to avoid breaking bisectability - Add additional gpio_request() calls for other samsung boards - Use a mask instead of division in gpio_request() naming call - Remove RFC label now that build errors are fixed - Tidy up and update cover letter message - Avoid reordering functions Changes in v4: - Add patches for exynos GPIO support Simon Glass (12): dm: exynos: dts: Convert /include/ to #include dm: exynos: Bring in pinctrl dts files from Linux kernel dm: exynos: dts: Remove unused pinctrl information to save space dm: exynos: dts: Adjust device tree files for U-Boot dm: exynos: Add pinctrl settings for smdkc100 dm: exynos: Add pinctrl settings for s5p_goni dm: exynos: Move smdkc100 to generic board dm: exynos: Move s5p_goni to generic board dm: exynos: Tidy up GPIO headers dm: exynos: Tidy up GPIO defines dm: exynos: Make sure that GPIOs are requested dm: exynos: gpio: Convert to driver model arch/arm/cpu/armv7/exynos/pinmux.c | 5 +- arch/arm/dts/exynos4.dtsi | 9 +- arch/arm/dts/exynos4210-origen.dts | 4 +- arch/arm/dts/exynos4210-pinctrl-uboot.dtsi | 27 ++ arch/arm/dts/exynos4210-pinctrl.dtsi | 304 ++++++++++++++++++++ arch/arm/dts/exynos4210-smdkv310.dts | 2 +- arch/arm/dts/exynos4210-trats.dts | 2 +- arch/arm/dts/exynos4210-universal_c210.dts | 2 +- arch/arm/dts/exynos4210.dtsi | 156 ++++++++++ arch/arm/dts/exynos4412-odroid.dts | 2 +- arch/arm/dts/exynos4412-trats2.dts | 2 +- arch/arm/dts/exynos4412.dtsi | 38 +++ arch/arm/dts/exynos4x12-pinctrl-uboot.dtsi | 46 +++ arch/arm/dts/exynos4x12-pinctrl.dtsi | 344 ++++++++++++++++++++++ arch/arm/dts/exynos4x12.dtsi | 115 ++++++++ arch/arm/dts/exynos5.dtsi | 56 +++- arch/arm/dts/exynos5250-pinctrl-uboot.dtsi | 40 +++ arch/arm/dts/exynos5250-pinctrl.dtsi | 331 +++++++++++++++++++++ arch/arm/dts/exynos5250-smdk5250.dts | 2 +- arch/arm/dts/exynos5250-snow.dts | 2 +- arch/arm/dts/exynos5250.dtsi | 41 ++- arch/arm/dts/exynos5420-peach-pit.dts | 2 +- arch/arm/dts/exynos5420-smdk5420.dts | 2 +- arch/arm/dts/exynos54xx-pinctrl-uboot.dtsi | 40 +++ arch/arm/dts/exynos54xx-pinctrl.dtsi | 305 ++++++++++++++++++++ arch/arm/dts/exynos54xx.dtsi | 44 ++- arch/arm/dts/s5pc100-pinctrl.dtsi | 180 ++++++++++++ arch/arm/dts/s5pc110-pinctrl.dtsi | 273 ++++++++++++++++++ arch/arm/dts/s5pc1xx-goni.dts | 7 + arch/arm/dts/s5pc1xx-smdkc100.dts | 7 + arch/arm/include/asm/arch-exynos/gpio.h | 87 +++--- arch/arm/include/asm/arch-s5pc1xx/gpio.h | 7 +- board/samsung/arndale/arndale.c | 4 +- board/samsung/common/board.c | 2 +- board/samsung/common/misc.c | 3 +- board/samsung/goni/goni.c | 4 +- board/samsung/origen/origen.c | 2 +- board/samsung/smdk5250/exynos5-dt.c | 7 + board/samsung/smdk5420/smdk5420.c | 6 +- board/samsung/smdkc100/smdkc100.c | 2 +- board/samsung/smdkv310/smdkv310.c | 2 +- board/samsung/trats/trats.c | 17 +- board/samsung/trats2/trats2.c | 27 +- board/samsung/universal_c210/universal.c | 4 +- drivers/gpio/s5p_gpio.c | 446 +++++++++++++++++++---------- drivers/mmc/s5p_sdhci.c | 7 +- include/configs/exynos-common.h | 4 + include/configs/s5p_goni.h | 5 + include/configs/smdkc100.h | 5 + 49 files changed, 2797 insertions(+), 234 deletions(-) create mode 100644 arch/arm/dts/exynos4210-pinctrl-uboot.dtsi create mode 100644 arch/arm/dts/exynos4210-pinctrl.dtsi create mode 100644 arch/arm/dts/exynos4210.dtsi create mode 100644 arch/arm/dts/exynos4412.dtsi create mode 100644 arch/arm/dts/exynos4x12-pinctrl-uboot.dtsi create mode 100644 arch/arm/dts/exynos4x12-pinctrl.dtsi create mode 100644 arch/arm/dts/exynos4x12.dtsi create mode 100644 arch/arm/dts/exynos5250-pinctrl-uboot.dtsi create mode 100644 arch/arm/dts/exynos5250-pinctrl.dtsi create mode 100644 arch/arm/dts/exynos54xx-pinctrl-uboot.dtsi create mode 100644 arch/arm/dts/exynos54xx-pinctrl.dtsi create mode 100644 arch/arm/dts/s5pc100-pinctrl.dtsi create mode 100644 arch/arm/dts/s5pc110-pinctrl.dtsi -- 2.1.0.rc2.206.gedb03e5 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
