This patch adds I2C support for the SoCFPGA. Using the designware I2C controller driver. It supports all 4 I2C busses on the SoCFPGA.
Signed-off-by: Stefan Roese <s...@denx.de> Cc: Marek Vasut <ma...@denx.de> Cc: Vince Briders <vbrid...@altera.com> Cc: Chin Liang See <cl...@altera.com> Cc: Dinh Nguyen <dingu...@altera.com> --- include/configs/socfpga_common.h | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index 49504dc..ba1e072 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -157,6 +157,28 @@ #define CONFIG_BAUDRATE 115200 /* + * I2C support + */ +#define CONFIG_HARD_I2C +#define CONFIG_DW_I2C +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_SYS_I2C_BUS_MAX 4 +#define CONFIG_SYS_I2C_BASE SOCFPGA_I2C0_ADDRESS +#define CONFIG_SYS_I2C_BASE1 SOCFPGA_I2C1_ADDRESS +#define CONFIG_SYS_I2C_BASE2 SOCFPGA_I2C2_ADDRESS +#define CONFIG_SYS_I2C_BASE3 SOCFPGA_I2C3_ADDRESS +/* using standard mode which the speed up to 100Kb/s */ +#define CONFIG_SYS_I2C_SPEED 100000 +/* address of device when used as slave */ +#define CONFIG_SYS_I2C_SLAVE 0x02 +#ifndef __ASSEMBLY__ +/* clock supplied to I2C controller in unit of MHz */ +unsigned int cm_get_l4_sp_clk_hz(void); +#define IC_CLK (cm_get_l4_sp_clk_hz() / 1000000) +#endif +#define CONFIG_CMD_I2C + +/* * U-Boot environment */ #define CONFIG_SYS_CONSOLE_IS_IN_ENV -- 2.1.2 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
